drilling waste management companies Archives - Drilling waste management,oil based mud treatment,drilling mud circulation system,drilling waste management companies

08/10/202308/10/2023

KOSUN Mud Cleaner for Drilling Fluids Plays an Important Role in the Drilling Mud System

2, Gas separation: The drilling mud cleaner can remove gases from the drilling fluid, such as dissolved gases, bubbles, and free gas. By separating gases, it prevents negative impacts on the performance of the drilling fluid, such as reducing its density and increasing viscosity.

3, Viscosity reduction: The mud cleaner can lower the viscosity of the drilling fluid by removing colloids and high-molecular-weight polymers, improving its flowability and pumping performance.

Mud cleaner for drilling fluids is the second phase purification Equipment in the Drilling mud system. It’s mainly used for the treatment of 15~47μm solid particles in drilling fluids. The main purpose of the mud cleaner for drilling fluids is to purify and treat the drilling fluid during the drilling process in order to maintain and optimize the performance and quality of the drilling fluid.
Its specific uses include:
1, Solids control: The mud cleaner machine effectively removes solid particles from the drilling fluid, such as drill cuttings, rock cuttings, and sand particles. This helps maintain the cleanliness of the drilling fluid, preventing the accumulation and deposition of solid particles in drilling equipment, thereby reducing equipment wear and failures.

4, Performance adjustment: The mud cleaner desilter desander allows for the adjustment of the drilling fluid according to specific needs. This can be achieved by adding chemical agents and adjusting process parameters to meet the requirements of different formations and drilling conditions, such as adjusting the density, viscosity, and filtration control of the mud.

In a word, the mud cleaner is used to ensure that the drilling fluid maintains good performance and quality, thereby improving drilling efficiency and safety. KOSUN Machinery can design and produce different types of Mud cleaner according to customer needs.

https://hankoresources.com/kosuns-drilling-waste-treatment-system-has-been-successfully-put-into-operation-in-many-well-sites/

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 13379250593
Contact person: Monica Li
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

08/22/201710/23/2017

Drilling Waste Management Company-Kosun

Drilling waste management is the name of a major headache for the companies involved in drilling in different gas and oil mines. Due to the increased awareness of people regarding environment, drilling companies have to perform an extensive procedure before disposing the drilling waste. It is a very complex process in which the intervention of the professionals is required. So, drilling companies must seek the expertise help from a waste management engineer in order to ensure the proper disposal of shale shaker generated waste without disturbing the environment.

Drilling waste management entails all processes and precautions required or recommended to ensure a safe environment. Drilling waste contains spent fluids and drilling cuttings that result from the drilling process. The spent fluids and drilling cuttings that are referred to as drilling waste have no use in the ensuing drilling process therefore must be disposed of. However the disposal of this waste requires that the set environmental management standards and regulations are adhered to for the maintenance of a safe environment and also in order to avoid legal disputes and penalties.

Drilling waste management therefore is concerned with using materials, substances and facilities in the drilling process that minimize drilling waste while at the same time employ proper disposal of waste in a manner that reduces toxicity.

Drilling waste management company – Kosun, from China, are searching drilling mud treatment and disposal methods for 25 years, manufacturing quality drilling cuttings waste management system and serving the clients around the world.

Kosun- Solids Control Company

08/18/2017

TOP brand Drilling Waste Management Companies

TOP brand Drilling Waste Management Company-KOSUN, founded in 1992, is the leader Company in China’s solids control industry, and specialize in drilling waste management related machines, construction machines and environment production machines. such as solids control equipment, centrifuges, HDD machine, pumps, shakers, and etc., including 25 categories of products. and can also customize packaged design and matching products.

Drilling waste management company – Kosun, from China, are searching drilling mud treatment and disposal methods for 25 years, manufacturing quality drilling cuttings waste management system and serving the clients around the world.

1.Mud agitator manufacturer – Kosun producing the drilling mud agitator mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

2.Screw Conveyor:KOSUN screw conveyor (Auger)can be used in drilling waste management projects, providing an effective and low-cost drilling cuttings transport system for offshore and onshore drilling rigs. Adopting a multi-sectional composite structure with each section of 12 feet (3.66m), the screw conveyor can be flexibly assembled on different drilling sites, with characteristics of simple operation, stable structure, strong adaptability and high safety, significantly improving the operating efficiency of equipment and reducing the cost and resources. The flights of screw conveyer adopt wear-resistant material to ensure its service life.

The screw conveyor is designed based on strict safety standards. The U-shaped trough is equipped with grid shield to prevent foreign matters from entering and guarantee the safety of operators. The frame at the bottom can protect and support the screw conveyor, ensuring its structural stability.

3.3 phase Decanter Centrifuge: 3 phase decanter centrifuge can be used in following cleaning, solid remove and impurity remove 3 phase separation field: tar, pesticide, oil filed recovered oil, used oil, waste oil & fat from restaurant, palm oil, oil tank cleaning, oil refining sludge, oil station cleaning sludge, olive oil, orange oil, gas floating sludge, food waste sludge.

4.Kosun machinery (KOSUN) waste drilling fluid production of cuttings dryer for oil-based mud, by centrifugal separation principle, can effectively recover the cuttings in liquid phase composition, the solid phase becomes very dry, the drilling mud in the recovery, reduce the cost of drilling operation, but also reduces the the pollution of the environment, in accordance with international emission standards and environmental protection requirements. It can be used for drilling cuttings in land and ocean drilling.With the continuous improvement of environmental protection requirements, the major oil fields are faced with the problem of drilling wastedisposal.

Need more information about drilling waste management: http://www.kosuneco.com/category-80.html

07/13/201707/13/2017

Drilling Waste Management System – Containment and Handling

Drilling Waste Management

Drilling waste management is more and more important. The necessity of energy is increasing relentlessly. People are becoming more and more power hungry. With the increase in the demand, drilling companies are trying to cope up with the ever increasing demand by setting up new drilling sites.

A major issue that any drilling company has to handle is how to manage the drilling wastes generated from shale shaker cuttings. Drilling waste management companies are trying to sort out the most environment friendly method for the waste management.

A major step of drilling waste management plan is managing the containment of the wastes generated by shale shaker. A discussion about the issue is given below.

How the drilling waste is contained and handled: The first issue that should be consider in containing and handling drilling waste is the geographical features of the certain drilling sites.

Containment and handling of drilling wastes are no longer to simply on shore based as more and more companies are engaging in off shore drilling for new source of oil and gas. The most common way of managing shale shaker generated drilling wastes is building and using sumps.

Different types of drilling wastes including cement returns drilling wasted and drilling cuttings are contained in a sump. The sumps that are used to contain drilling wastes should not be built in non – polluted area of surface.

A sump inspection must be performed by experts right before the waste disposed in it. A waste tracking system for the drilling wastes must be developed to control the flow of wastes in the sumps.

A regular and efficient inspection schedule must be maintained by the employees in order to ensure that waste contamination sumps are in subtle condition. Another important issue for handling and contamination of drilling waste is decommissioning the sumps. When any sump is decommissioned, drilling authority must ensure that there is zero possibility of further contamination.

07/06/201707/06/2017

Drilling Waste Cuttings Treatment – Pit Less Mud System

Drilling Waste

Oil and gas drilling is one of the most prolific business now a days. A very complex mechanism is used to drill oil and gas from the mine. A very common equipment that is seen in oil and gas drilling area is a shale shaker.

There are two basic approaches of drilling using a shale shaker .
The first one is the solid control system which is very popular for drilling now a days.
The second approach is the pit less mud system for drilling. Today the focus will be given on the pit less mud system for drilling.

What is pit less mud system for drilling: The pit less mud system for drilling is basically a process in which no pit is dug on the surface while for collecting cuttings from drilling.

In pit less mud system for drilling waste cuttings treatment , a very important thing that is required to maintain is a proper integration between the waste management system and solid maintaining process. When the waste cuttings are taken out from shale shakers , two particular equipments named G force drying shaker and vertical cutting dryer are used to extract the liquid and to make the cuttings drier.

After that, the dry cuttings are transported from the shale shaker unit to the disposal unit. In that stage, the waste cuttings can be disposed on the surface without digging any pit. In many oil and gas drilling sites, a more environment friendly approach is taken to dispose drilling waste cuttings.

In that case, the drilling waste cuttings are taken to another unit for the final processing. In this unit, the waste cuttings are processed via solidification process. Waste cuttings can also be processed by thermal desorption machine. Thus, the drilling waste cuttings become contamination free and environment friendly. Then, the waste cuttings can be disposed without any fear.

07/05/201707/20/2020

Drilling Mud Waste Management System of Kosun Strategies

Drilling Mud Waste Management

Drilling Mud Waste management is one of the major concerns for the drilling companies all around the world. It is simply impossible to avoid pollution while shale shaker perform drilling. The main sources of drilling waste are the fluid removed drilling cuttings that are cut by the shale shaker.

Drilling companies are undergoing through an extensive pressure from various environment activists all around the world. So, an environment friendly waste management system is a prime requirement for the drilling companies. Several waste management strategies are taken into action for different types of waste while drilling. Here is a discussion about different types of drilling waste management strategies.

Different approaches for waste management: In order to manage the waste of a drilling site, the first step is to set up necessary solid control equipment like shale shaker. Till now the most popular drilling waste management strategy that is used is dilution. In the dilution process for controlling solids, a certain amount of fluid is extracted from the cuttings and are gathered into a pit. The rest of the cuttings are transformed into a concentrated solid after another extraction of fluid is executed to those by adding any liquid like water or oil.

After this, the drilling wastes become ready to be disposed. In the next step, it is imperative to determine the surface area and the amount of waste that is required to handle. While disposing the wastes, drilling companies can use G force drying shaker to make the wastes radiation and contamination free. Another consideration in drilling waste management is managing the cement returns.

Sometimes cement returns are simply disposed by following the mix bury cover system. In this process, the drilling waste with cement returns is gathered altogether and transformed into hard cement pit. Then, the hard pits of cement returns are grinded into small pieces. After that, the grinded cement pits can be disposed. The whole process of management must not take more than a year.

06/14/201707/20/2020

Drilling Waste Treatment System – From Kosun Manufacturer

Drilling Waste Treatment

Drilling waste treatment more and more get recognized and popoular in industry.

Over the past few decades, the oil and gas industry has taken various measures to minimize the waste generated by drilling in order to better protect the environment and public safety.

Drilling operators use environmentally friendly tertiary waste treatment methods to deal with drilling waste:
in the first stage, the operator adjusts the drilling process or displaces the appropriate drilling fluid to minimize the waste generated during the drilling process. This is both for the operator to reduce the cost of dirt treatment, but also more conducive to environmental protection.
The second stage, will have been reduced to a low limit of drilling waste as much as possible recycling.
The third level, through a legitimate way to deal with can not be recycled drilling waste.

Offshore drilling waste treatment is limited to emissions, re-injection or return to shore.

In contrast, land operators have a large range of options in dealing with drilling fluids. Usually onshore drilling waste in situ; on the offshore platform, most of the water-based mud and cuttings and synthetic slurry are poured into the sea; some land drilling waste is transported to commercial waste disposal outside the well site And offshore oil-based mud and cuttings must be returned to shore or re-injected into the ground at the well site.

At present, drilling companies are studying new drilling fluids for different stratigraphic conditions. The new drilling fluid not only has the proper drilling characteristics, but also contains less harmful additives that inhibit vegetation growth.

The use of new, more environmentally friendly additives in place of important components in drilling fluids, such as the use of ilmenite powder instead of barite powder as a mud aggravating agent, can reduce the impact on the environment.
Current drilling fluid heat treatment costs are high, and not suitable for offshore use. The future may improve the drilling fluid heat recovery drilling waste treatment technology, reduce processing costs, improve the organic lye recovery rate. The new approach will improve safety and effectiveness and make it suitable for offshore drilling platforms.

05/09/201711/01/2017

Drilling Waste Management Market-Global Market

Drilling Waste Management Market

Drilling waste management market cover all over the world that equipment recoginized all over the world and appraised all over the world.

With the development of the industry, we are facing more and more challenges
and responsibility to protect our environment. At the same time, government agencies continue to increase the limit emission polls cut into the environment.
Support both goals Industry and regulatory agencies.
Kosun has been developed sturdy drilling waste management equipment to lessen pollution.

Drilling waste management system module — Drilling waste management equipment module

KOSUN is registered in Beijing as an import-export trading company specializing in well-drilling solid control equipments, drilling Rig accessories and mud services in the oil field. KOSUN Oil Service takes charge of the promotion, sales and after-sales service of its products in Chinese market. As one of the main partners of DERRICK in Chinese market, KOSUN Oil Service is available to provide all series of products and accessories of DERRICK to customers in China.

1. Kosun was established in 1992, the oil field solid control equipment has 25 years of history.
2. Kosun products are exported to Russia, Kazakhstan, Turkmenistan, Azerbaijan, Egypt, Nigeria, Malaysia, Canada, India and Mexico and other 70 countries.
3. Kosun is one of the earliest manufacturers of ancillary drilling equipment in China and the exclusive manufacturer of oil field solid control equipment.
As China’s first API control of solid control equipment manufacturers.
4.KOSUN has more than 76 patents on solid control and drilling mud waste management equipment.
5. Corson products through the European DNV CE and the Russian TP TP certification.
6.KOSUN Solids America LLC is China’s first US-based solid control company.
7. Kosun management system production in line with HSE system ISO900 and ISO 1: 2008, to ensure your safety products.
8. Kosun has the right to use the API Q1 logo, is the oil and Sinopec oil drilling equipment and parts of a network provider.
9. The total area of the Solid Control System is more than 70,000 square meters (700,000 square feet).
10. The establishment of after-sales service companies in Kazakhstan and Indonesia and the development of high standards in nearly 20 countries, responsible for sales and after-sales services.
11. KOSUN is SCOMI and BRANDT partners in China.
12.KOSUN has a special equipment for manufacturing vibrating shaker screens in Asia’s largest screen center city.

We are looking forward to cooperation with you.

05/09/201707/20/2020

Drilling Waste Management System From Famous Brand Kosun

Drilling Waste Management System

Drilling Waste Management System is very popular in the drilling industry. There are three series:
1.oil & gas drilling solids control equipment
2.drilling waste treatment equipment
3. decanter centrifuges

Including 25 categories of products which can be provided by Kosun.
They are used in below category:
1.coalbed methane drilling
2.shale gas drilling
3.water well
4.geothermal well drilling
5.trenchless horizontal directional crossing projects,
6.mine gravel staged treatment
7.tailings treatment
8.rive dredging works
9.industrial wastewater treatment
10.environmentally friendly sewage treatment
11.waste oil recovery and purification treatment
12.oil &gas drillingand workover.etc.

In order to meet for the requirements of international market, KOSUN have got approval of ISO9001, API SPEC Q1, ISO/TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certificates.

Advantages and Benefits

1.Recovery and Recycling
Reducing, recycling and recovery are key to effective waste management
deal with. We try to recycle and recover, reduce operating costs
As well as the affect on the environment.

2.Processing and Disposal
We provide several processing and handling options to solve your drilling waste need.
They were selected as part of our engineering fluid management
SM process to determine the appropriate action required – given specific fluid types, environmental restrictions and created waste streams

3.Inclusive and Handling
With the increasing pay more attention on environmental protection, the industry is dedicated to safe control and handling of drilling waste.
We share this commitment with the equipment portfolio to mitigate issues related to managing drilling waste,
Reduce environmental compliance issues and promote best practices.

Drilling waste management system not only shorten the drilling time but alos minimize borehole problems and take systematic measures.
Method to carry out the life cycle analysis of the well, can improve and maximize the drilling performance.

Kosun website welcome your coming. We will try our best to provide best service and high quality products. Please don’t hesitate to contact us. We are happy to assist you.

05/08/201707/20/2020

Drilling Waste Management System High Quality Low Price From KOSUN

Drilling Waste Management System

Drilling waste management system is consist of several sets of equipment for conveying cuttings.

Oil and gas field enterprise solid waste mainly has three kinds: drilling waste mud, cuttings dryer, landing crude oil, sludge and oil sands.

1, Drilling Waste Mud

(1) Classification: water-based drilling mud, oil-based drilling mud and gas-based drilling mud.

(2) the source:

First, due to changes in geological properties, the mud system to replace the sludge generated, that is not suitable for drilling engineering and geological requirements of drilling mud, drilling process, due to failure of part of the performance was discharged drilling mud ;

Second, after completion of drilling wells in the mud field. That is, the mud in the wellbore which is replaced by the clean water when the well is completed;

Thirdly, the mud which is generated by the leakage of the mud circulation system, that is, the drilling mud discharged by the circulatory system running, dripping, The waste mud yield is 634T / 104m, the discharge volume of drilling mud is about 40 × 104T / year, and the emission rate is about 40%

(4) The main pollutants: hydrocarbons, salts, all kinds of organic polymers, lignin sulfonate, some heavy metals (such as mercury, chromium, copper, lead, arsenic) and barite impurities.

(5) nature: PH value is high, about 8.5 ~ 12, basic; contains a certain amount of weighting agent and chemical treatment agent; some drilling mud contains oil; some contain toxicity (due to drilling formation contains Toxic substances, additives contain toxic substances).

(6) Hazard: high pH, high concentrations of soluble salts and petroleum affect the structure of soil and plant growth hazards; harmful heavy metal ions such as hexavalent chromium, divalent mercury, divalent cadmium, divalent lead and Organic compounds that can not easily be degraded by animals and plants, molecular polymers easily enter the food chain and accumulate in the environment or animals and plants, endangering the health and safety of human beings; organic waste treatment to increase the COD and BOD of aquatic organisms; Normal growth.