drilling waste management Archives - Page 4 of 4 - Drilling waste management,oil based mud treatment,drilling mud circulation system,drilling waste management companies

03/16/201707/20/2020

Drilling Waste Management Functions of Kosun

Drilling Waste Management Functions

Drilling waste management functions is different involve with drilling waster management system .

Drilling waste management is a very complex work. As there is a concern for the environmental degradation due to the contamination caused by an inefficient disposal of shale shaker generated drilling waste, drilling companies all around the world try to handle the total procedure of drilling waste management professionally.

A specific systematic process is followed in the approach of waste management. In this process, there are several functions that should be followed one by one. This step by step procedure helps to develop an efficient waste management system. In this article, an attempt will be taken to have snake peak to all the functions that are involved in a drilling waste management.

Drilling waste management functions : The first function of any companies drilling waste management is equipping the essential equipment and tools in the drilling areas. These equipments include shale shaker, vertical dryer and G force drying shaker etc. After equipping these machines, the drilling waste is gathered in a pit for processing. In the next phase, the function that is required to perform is to control the solid concentration.

An increased solid concentration in the waste is hard to dispose. The next activity in the to do list for drilling waste management is determining the particle size and the volume of waste that is required to be disposed.

The surface area that would be used for the disposal should also be prepared in this stage. In the next step, the drilling waste gets separated from the core mineral products that have been extracted from the mines. It is a redundant process in which the focus is given to extract the maximum amount of mineral.

After the separation, the drilling waste is processed for decontamination via various equipments. After that the waste gets disposed finally in the environment.

03/15/201711/01/2017

Drilling Waste Management Services by Kosun Help Companies

Drilling waste management services

Drilling waste management services are processing the wastes through vast and systematic equipments. Services from Kosun in recent was reflected helped many clients a lot.

The procedure is simple: First use shale shaker extracts drilling cuttings from the mines and then the extraction of fluids from the cuttings, the left is considered as drilling wastes which need to be managed.

After all the processing, the most important issue needs to be handled regarding drilling waste management services. The issue is determining the waste disposal option. It is the end stage of the total drilling waste management. An environment friendly waste disposal method must be followed in order to calm down all the controversy and criticism regarding environmental sustainability.

And following is the 3D picture of drilling waste management services by Kosun:

Here a brief discussion about the Drilling Waste Management Services Help Companies is given below:
How the drilling waste should be disposed? A very common disposal method of drilling waste is land spray while drilling. In this method, the drilling waste is sprayed by using a pump. This method of disposal is very effective for fluid based drilling waste. It is very cost effective.

Another effective way of disposing drilling waste is pumping off the waste. In this process, the non – radioactive clear fluid of waste is pumped in a green planting area. It is very sustainable way of disposal as it ensures the best use of natural elements. Another vastly used approach for waste disposition is the mix – bury approach. In this method, a mixture is created by using drilling waste with mud of disposing area. Above the mixture of those two components, a single layer of soil is used to cover the mixture.

It is also a very environment friendly way of waste disposition as it causes minimum contamination. Finally, another way of disposing the drilling waste is using separate waste disposal sumps. In this method, several waste sumps are built for disposing different types of waste. It is the formal waste disposal system of drilling companies.

03/14/201706/26/2017

Drilling Waste Management, Drilling Waste Disposal Options

Drilling Waste Management

Drilling waste management is a vast and systematic process. After shale shaker extracts drilling cuttings from the mines and after the extraction of fluids from the cuttings, whatever is left is considered as drilling wastes . These wastes are required to be decontaminated by processing the wastes in various equipments.

After all the processing, the most important issue needs to be handled regarding drilling waste management. The issue is determining the waste disposal option. It is the end stage of the total drilling waste management. An environment friendly waste disposal method must be followed in order to calm down all the controversy and criticism regarding environmental sustainability.

Here a brief discussion about the drilling waste disposal options is given below.
How the drilling waste should be disposed? A very common disposal method of drilling waste is land spray while drilling. In this method, the drilling waste is sprayed by using a pump. This method of disposal is very effective for fluid based drilling waste. It is very cost effective.