drilling waste treatment Archives - Page 2 of 3 - Drilling waste management,oil based mud treatment,drilling mud circulation system,drilling waste management companies

06/04/201710/11/2017

Drilling Waste Management Equipment by Kosun

Drilling Waste Management

In the process of drilling a water or oil hole, the solids that are obtained and the drilling fluid get mixed. This is called drilling waste. This waste must first be separated for proper management.

Drilling waste management equipment including: Vertical Cuttings Dryer(

Vertical Centrifuge), D Series Decanter Centrifuge , Screw Pump……

After separation of the mixture, the drilling fluid that is obtained can be reused. But for the solids that are obtained, proper measures need to be taken so that there is minimum wastage and no harm is caused to the environment.

Kosun Drilling Waste management — Drilling Waste Management

The first step is to take care that the waste which is generated is as minimum as possible. This can be done by slightly changing the way, the hole is drilled. That is instead of conventional drilling other drillings options must be considered like;
1] Directional Drilling: Here instead of going directly vertical, drilling is done by taking angles while going down. Its variations are extended reach drilling, horizontal drilling and multiple laterals.
2] Drilling holes with small diameter: Technologies used to obtain holes with smaller diameter are slim hole drilling and coiled tubing drilling.
3] Techniques in which less drilling fluid is required like pneumatic drilling.

The second step is to use those fluids that does not harm our environment. Examples of such fluids are Synthetic Based muds (SBM) that biodegradable, does not accumulate and digs clean holes and has almost no toxicity.

Third is that, the wastes that are obtained must be reused as much as possible. The fluid that is obtained can be reused again as a drilling fluid. The solid cuttings that are obtained can be reused by spreading it on road and preventing road erosion or using it as a construction material.

Lastly, proper care must be taken for those solids that cannot be used and needs to be disposed. For pits may be build or may be dumped as landfills, where another layer of soil or other material.
The advantages of Drilling waste management are:
• It is good for the environment and saves energy.
• It reduces the cost of operation as we get to reuse the materials.

Drilling waste management equipment including: Vertical Cuttings Dryer(

Vertical Centrifuge), D Series Decanter Centrifuge , Screw Pump……

05/09/201711/01/2017

Drilling Waste Management Market-Global Market

Drilling Waste Management Market

Drilling waste management market cover all over the world that equipment recoginized all over the world and appraised all over the world.

With the development of the industry, we are facing more and more challenges
and responsibility to protect our environment. At the same time, government agencies continue to increase the limit emission polls cut into the environment.
Support both goals Industry and regulatory agencies.
Kosun has been developed sturdy drilling waste management equipment to lessen pollution.

Drilling waste management system module — Drilling waste management equipment module

KOSUN is registered in Beijing as an import-export trading company specializing in well-drilling solid control equipments, drilling Rig accessories and mud services in the oil field. KOSUN Oil Service takes charge of the promotion, sales and after-sales service of its products in Chinese market. As one of the main partners of DERRICK in Chinese market, KOSUN Oil Service is available to provide all series of products and accessories of DERRICK to customers in China.

1. Kosun was established in 1992, the oil field solid control equipment has 25 years of history.
2. Kosun products are exported to Russia, Kazakhstan, Turkmenistan, Azerbaijan, Egypt, Nigeria, Malaysia, Canada, India and Mexico and other 70 countries.
3. Kosun is one of the earliest manufacturers of ancillary drilling equipment in China and the exclusive manufacturer of oil field solid control equipment.
As China’s first API control of solid control equipment manufacturers.
4.KOSUN has more than 76 patents on solid control and drilling mud waste management equipment.
5. Corson products through the European DNV CE and the Russian TP TP certification.
6.KOSUN Solids America LLC is China’s first US-based solid control company.
7. Kosun management system production in line with HSE system ISO900 and ISO 1: 2008, to ensure your safety products.
8. Kosun has the right to use the API Q1 logo, is the oil and Sinopec oil drilling equipment and parts of a network provider.
9. The total area of the Solid Control System is more than 70,000 square meters (700,000 square feet).
10. The establishment of after-sales service companies in Kazakhstan and Indonesia and the development of high standards in nearly 20 countries, responsible for sales and after-sales services.
11. KOSUN is SCOMI and BRANDT partners in China.
12.KOSUN has a special equipment for manufacturing vibrating shaker screens in Asia’s largest screen center city.

We are looking forward to cooperation with you.

05/09/201711/01/2017

Drill Waste Management Delivery to Foreign Countries

Drill Waste Management

Drill waste management got well appraised by customers at home and abroud. At the same time , a lot of orders come from all over the word.

Drill waste management that from Kosun received considerable orders from Africa and Russia at the start of new year 2017.

drill waste management equipment — drill waste management

Why drill waste equipment is so popolar by custome
There are below reasons:

First and the most thing is high quality
strong Research and Development team
much more experices
Customer Oriented
excellent cost performances in using effect and service life.
recommend the most suitable products for customers according to their practical requirements
Perfect after sale services
Drill waste equipment is customized by KOSUN for Kazakhstan and Russia customers that has completed production and commissioning work , which will be shipped recently.Drill waste equipment is designed by customers actual needs. In the system design process and equipment configuration on both the cost and processing results. Achieve the best processing results with the lowest cost under customer requirements.
KOSUN is capable of providing customers with such three series as oil & gas drilling solids control equipment, centrifuges and drilling waste treatment equipment, including 25 categories of products, which are extensively used in oil & gas drilling and workover, cutting dryers, coalbed methane drilling, vertical cuttings dryer, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, industrial wastewater treatment, environmentally friendly sewage treatment, waste oil recovery and purification treatment, etc.
Kosun constantly sum up their own shortcomings, strengths and weaknesses，learn more about experience . Our goal aimes to strive to the world first. Although there is still a great distance, but we believe that as long as we pay more attention to do every steps, keep up with the pace of the times, the goal is no longer distant.

05/08/201707/20/2020

Drilling Waste Treatment Guarantee Quality First by Kosun

Drilling Waste Treatment

Drilling waste treatment are increasing gradually. Mining and Drilling Waste Processing Oil and gas extraction operations generate a variety of liquid waste streams, including vertical cuttings dryer and tailings, which require transport and disposal. For many operations, this mining and drilling waste can become a profit killer. Superabsorbent polymers (SAPs) effectively cure waste without significantly increasing weight or volume to reduce waste transportation and disposal costs.

To provide a fully customized drilling waste management solution, we employ a broad portfolio of modular or mobile technologies to deploy a unique configuration tailored to your operational needs.

From centrifuges to cutting machines, vacuum and conveying systems to heat treatment equipment, we have the right products to solve any challenge, as well as the implementation of the ideal solution by professionally trained personnel.

Maximizing Drilling Efficiency
By adopting flexible operational, technical and logistical approaches, we are able to balance the complexity of regulatory and economic conditions, design and deploy optimal waste management solutions, and maximize drilling efficiency.

Environmental Leadership
We offer drilling waste solutions that are designed to meet or exceed your project’s environmental regulations. Reducing waste, liquid reuse and advanced cutting treatments all help limit waste transport and reduce the risk of environmental accidents.

Reduce total cost
Efficient solutions help reduce waste processing time, transport and handling, and help ease logistics challenges. Our custom drilling waste solutions are designed to deliver these efficiencies and help you reduce the total cost of your oil well operations.

Kosun is an international brand of solid control and drilling waste management equipment manufacturers with extensive experience and global service.

Branch-will serve wholeheartedly for domestic and foreign customer service, with strong technical strength and perfect after-sales service system. Branch-look forward to your negotiations and cooperation!

Kosun has the confidence to provide more cost-effective equipment and mud systems in 2017.

03/30/201707/20/2020

Drilling Waste Treatment of Pit Less Mud System by Kosun

Drilling Waste Treatment

Drilling waste treatment of pit Less Mud system, is a very important thing that is required to maintain is a proper integration between the drilling waste management system and solid maintaining process.

Oil and gas drilling is one of the most prolific business now a days. A very complex mechanism is used to drill oil and gas from the mine. A very common equipment that is seen in oil and gas drilling area is a shale shaker.

There are two basic approaches of drilling using shale shakers .
The first one is the solid control system which is very popular for drilling now a days.
The second approach is the pit less mud system for drilling. Today the focus will be given on the pit less mud system for drilling.

Drilling waste treatment for sale — Drilling waste treatment

What is pit less mud system for drilling: The pit less mud system for drilling is basically a process in which no pit is dug on the surface while for collecting cuttings from drilling.

When the drilling waste cuttings are taken out from shell shaker, two particular equipments named G force drying shaker and vertical cutting dryer are used to extract the liquid and to make the cuttings drier. After that, the dry cuttings are transported from the shale shaker unit to the disposal unit. In that stage, the waste cuttings can be disposed on the surface without digging any pit. In many oil and gas drilling sites, a more environment friendly approach is taken to dispose drilling waste cuttings .

In that case, the drilling waste cuttings are taken to another unit for the final processing. In this unit, the waste cuttings are processed via solidification process. Waste cuttings can also be processed by thermal desorption machine. Thus, the drilling waste cuttings become contamination free and environment friendly. Then, the waste cuttings can be disposed without any fear.

03/16/201711/01/2017

Drilling Waste Treatment Approach by Kosun

Drilling Waste Treatment

Drilling waste treatment approach by Kosun play a very important role in reducing waste generated during drilling activities to acceptable levels of the environment.

Oil and gas extraction has been a trillion dollar industry and will be for years to come. Thus the process and consequences of the extraction of these precious gifts from the earth also needs to be considered with some level of seriousness.

Drilling waste management equipment including: Vertical Cuttings Dryer( Vertical Centrifuge), D Series Decanter Centrifuge , Screw Pump , Hi-G Dryer and so on.

Due to the heavy demand of these commodities on a global scale, the activities that led to its production increases significantly over the years. This in turn, led to the generation of large quantities of unwanted waste, referred to as drilling waste.

So some suitable method for its disposal was requisite to the keep the problem under control. As a result of this, scientists and experts developed some effective techniques for effective and economical disposal of drilling waste and let’s take a look at some of the popular ones.

Drilling waste produced as a result of extraction of oil and gas are mainly categorized based on two different criterions. The first one, based on the nature of particles in the waste is divided into fluid wastes and solid wastes. The second classification based on how harmful the waste is towards environment categorizes it into acceptable and non acceptable waste disposal. Non acceptable are considered more dangerous and volatile to the environment and needs to be disposed off with greater care.

Today, with much importance given to ideas of sustainability and conservation, many companies in the extraction have taken it into making the process more environmental friendly. This can be done only through an effective waste disposal system.

There are truck services and transportation services available today that moves this waste from the extraction area for proper disposal. Later it is disposed off or converted into a useful form, agricultural fertilizers for instance. Salt water spills, fresh water drilling mud, crude oil spills etc are the byproducts of inefficient waste disposal. In cases of oil spillage, specialized services are available as well.

03/15/201706/26/2017

Drilling Waste Treatment Methods from Kosun

Drilling Waste Treatment Methods

Drilling waste Treatment methods plan a very important for environment protection.

Drilling waste management system including a trailer having at least one centrifuge and a solids catch tank receiving solids.

An effective drilling waste management is an essential characteristic of a successful drilling operation. The very process of drilling oil and gas does in fact generate large quantities of spent muds and drill cuttings. And this quantity is no negligible amount.

According to a study conducted way back in 1995, an estimated quantity of 150 million barrels or drilling waste was generated in American soil alone. This gives us a brief idea about the total waste generated by these activities which in turn stresses the importance or need for an effective management and handling system for this waste.

Drilling waste generated in the process is broadly classified into two: drill fluids and drill vertical cuttings . Drill fluids also known as muds, are used to facilitate the smooth functioning of these equipments and is separated in the final stages. These wastes are separated by mechanical means and some effective techniques have been developed by scientists over the century.

Quite recently did scientists develop the effective solid removal system, which is mechanical in its functioning. Before its introduction there were methods like dilution which involved transferring the whole matter into a waste pit. In the waste pit, the matter is diluted to facilitate easy separation of the unwanted and desired materials.

Other method used for managing or disposing of drilling waste , mainly solid waste is through the conventional method of settling. The solid is allowed to settle to the bottom of a specialized tank like structure. From this, the settled particles are removed deliberately by one way or the other.

There are many other methods as well for waste management and removal, but the most commonly used is the one with mechanical removing technique. The waste removed by these methods is later contained in some tank like structure. After suitable means of management and containment, it is then disposed properly with no harm done to anyone.

03/14/201706/26/2017

Drilling Waste Management, Drilling Waste Disposal Options

Drilling Waste Management

Drilling waste management is a vast and systematic process. After shale shaker extracts drilling cuttings from the mines and after the extraction of fluids from the cuttings, whatever is left is considered as drilling wastes . These wastes are required to be decontaminated by processing the wastes in various equipments.

After all the processing, the most important issue needs to be handled regarding drilling waste management. The issue is determining the waste disposal option. It is the end stage of the total drilling waste management. An environment friendly waste disposal method must be followed in order to calm down all the controversy and criticism regarding environmental sustainability.

Here a brief discussion about the drilling waste disposal options is given below.
How the drilling waste should be disposed? A very common disposal method of drilling waste is land spray while drilling. In this method, the drilling waste is sprayed by using a pump. This method of disposal is very effective for fluid based drilling waste. It is very cost effective.

Another effective way of disposing drilling waste is pumping off the waste. In this process, the non – radioactive clear fluid of waste is pumped in a green planting area. It is very sustainable way of disposal as it ensures the best use of natural elements. Another vastly used approach for waste disposition is the mix – bury approach. In this method, a mixture is created by using drilling waste with mud of disposing area. Above the mixture of those two components, a single layer of soil is used to cover the mixture.

It is also a very environment friendly way of waste disposition as it causes minimum contamination. Finally, another way of disposing the drilling waste is using separate waste disposal sumps. In this method, several waste sumps are built for disposing different types of waste. It is the formal waste disposal system of drilling companies.

03/10/201711/01/2017

Drilling Waste Management Of Oil and Gas Handbook

Drilling Waste Management

Drilling waste management is one of the most frequent duties that should be performed in any drilling area. A skilled management system must be developed for the drilling waste management.

If any drilling company fails to perform certain sustainable procedure while drilling waste, it is certain to face the eye of the storm for the lack of competency in managing drilling waste. So, in order to solve this problem, a very approach has been taken by the drillers all around the world.

They have developed a certain agenda of fundamental procedure for drilling and disposing the drilling waste in an environment friendly way. This is called the oil and gas handbook for drilling waste management. Now, here is a brief discussion about the handbook of drilling waste management is given below.

The handbook of drilling waste management: According to the handbook in order to manage shale shaker generated oil and gas drilling waste, the construction and functioning of any commercial offshore waste management site, an application should be placed in front of the Environmental Bureau and to the oil conservation division.

A drilling company must confirm a financial assurance before establishing any waste management and disposal site in the area. Surface waste management facilities must only handle the non – intoxicating waste so that it can’t cause any environmental degradation.

There should be different approaches for managing different kinds of waste depending on their contaminating and radio activity level. The professionals that are responsible for managing the drilling waste must be certified and well trained. Drilling sites must not expose any intoxicating waste to the environment in any circumstance. After gathering waste from shale shaker, shaker screen there should be a proper and an extensive procedure to decontaminate the drilling waste right before the disposal.

Finally, the handbook for waste management provides the necessary and valuable guideline to the drillers for a sustainable waste management.

03/07/201711/01/2017

Drilling Waste Management Companies Oil and Gas Handbook

Drilling Waste Management Companies

Drilling waste management companies – Kosun offer Oil and Gas handbook for gives a set of rules that must be followed to manage Drilling waste. It is available on requesting Oil and Gas Commission (OGC).

Drilling waste management companies of Kosun have a lot of products, such as: decanter centrifuge , shaker screen , vertical cutting dryer , shale shaker ……

Drilling waste management companies told you that, it is important to first separate the mixture of solid and the drilling fluids. The drilling fluid that is obtained can be reused. The solids that are obtained must be either disposed of in an eco-friendly manner or can be used in some particular places.

Some the standard rules that must be adopted to minimize waste are:
1] Drilling Waste Containment:
•   The waste obtained from drilling must be properly contained either in a sump (earthen hole) or good quality tanks.
•   There must be proper record of how the drilling waste is stored and how is it disposed.
•   It must not be mixed with other wastes.

2] Suitable Disposal Sites:
•   The site where the waste is doing to be disposed must suitable and must not cause pollution.
•   The suitability of the sites is soil is assessed and its salinity is measured.
•   Any toxic waste cannot be disposed. These types of wastes needs to be treated.
•   There are many reasons that can make the waste toxic, like, corrosion inhibitors, emulsifiers, lubricants, de foaming agents and even some type of bacteria.

3] Disposal Methods:
• There are many ways of disposing the waste of different kind.
• For water based mud systems, there are disposal options such as on- site disposal options and off-site disposal options.

4] Wastes from pipelines:
• When drilling a pipeline for fresh water or drilling a freshwater well, the drilling waste that is obtained here can be managed in many ways like, storage pits where pits are formed in soils and other off-site disposal options such as land spraying and land spraying while drilling.

We are looking forward to cooperation with you.