Posted on

Drilling Waste Treatment Importance Equipment from Kosun

Drilling Waste treatment

Drilling Waste Treatment Equipment With the development of the oil industry, the pollution problems caused by drilling are also getting more and more attention.

China’s oil field per year only drilling production of waste drilling fluid produced about more than 900,000 cubic meters, of which one-third of the discharge to the environment, the environment and stratigraphy have caused varying degrees of pollution. Drilling pollution is mainly based on waste drilling fluid and waste water pollution.

Drilling produces waste, including waste drilling fluids, diamond cuttings with drilling fluids, simply a mixture, such as excess cement, isolation fluids and other fluids. The amount of drilling waste is determined by a number of factors including the size of the wellbore, the efficiency of the solid-controlled equipment, the solid-phase capacity of the drilling fluid, the ability of the drilling fluid to inhibit the dispersion of the cuttings, and the amount of drilling fluid remaining on the cuttings.

drilling waste treatment
drilling waste treatment

The percentage of solid phase in the waste drilling fluid varies from 50% to 25% of the maximum. There is always a certain amount of drilling fluid with the cuttings together with the waste, no matter how good the solid control equipment, drilling fluid can not be separated from the cuttings. If these effluents are discharged, they will cause significant pollution to the environment.
Abandoned drilling mud pollution of the environment, in essence, waste drilling mud in the liquid phase of the environment pollution, vertical cutting，liquid reuse as a resource recycling as an important means of waste disposal.

In response to this issue, Tsunami Oil conducted a three-year repeated research and experiment, through a different treatment process, successively in Xinjiang Tarim Oilfield, Daqing Oilfield and other drilling waste management equipment on-site construction, Solid phase to meet the national requirements of the emission standards, most of the liquid phase as a slurry base for the re-use of resources, only a small amount of liquid after the depth of treatment after the standard discharge or re-injection.

A large extent to reduce the production costs of drilling fluid, but also to achieve the energy-saving emission reduction, the purpose of safety and environmental protection.

Posted on

Drilling Waste Management Equipment by Kosun

Drilling Waste Management

In the process of drilling a water or oil hole, the solids that are obtained and the drilling fluid get mixed. This is called drilling waste. This waste must first be separated for proper management.

Drilling waste management equipment including: Vertical Cuttings Dryer(

Vertical Centrifuge),  D Series Decanter Centrifuge ,   Screw Pump……

After separation of the mixture, the drilling fluid that is obtained can be reused. But for the solids that are obtained, proper measures need to be taken so that there is minimum wastage and no harm is caused to the environment.

Kosun Drilling Waste management
Drilling Waste Management

The first step is to take care that the waste which is generated is as minimum as possible. This can be done by slightly changing the way, the hole is drilled. That is instead of conventional drilling other drillings options must be considered like;
1] Directional Drilling: Here instead of going directly vertical, drilling is done by taking angles while going down. Its variations are extended reach drilling, horizontal drilling and multiple laterals.
2] Drilling holes with small diameter: Technologies used to obtain holes with smaller diameter are slim hole drilling and coiled tubing drilling.
3] Techniques in which less drilling fluid is required like pneumatic drilling.

The second step is to use those fluids that does not harm our environment. Examples of such fluids are Synthetic Based muds (SBM) that biodegradable, does not accumulate and digs clean holes and has almost no toxicity.

Third is that, the wastes that are obtained must be reused as much as possible. The fluid that is obtained can be reused again as a drilling fluid. The solid cuttings that are obtained can be reused by spreading it on road and preventing road erosion or using it as a construction material.

Lastly, proper care must be taken for those solids that cannot be used and needs to be disposed. For pits may be build or may be dumped as landfills, where another layer of soil or other material.
The advantages of Drilling waste management are:
•    It is good for the environment and saves energy.
•    It reduces the cost of operation as we get to reuse the materials.

Drilling waste management equipment including: Vertical Cuttings Dryer(

Vertical Centrifuge),  D Series Decanter Centrifuge ,   Screw Pump……

Posted on

Drilling Waste Management Market-Global Market

Drilling Waste Management Market

Drilling waste management market cover all over the world that equipment recoginized all over the world and appraised all over the world.

With the development of the industry, we are facing more and more challenges
and responsibility to protect our environment. At the same time, government agencies continue to increase the limit emission polls cut into the environment.
Support both goals Industry and regulatory agencies.
Kosun has been developed sturdy drilling waste management equipment to lessen pollution.

Drilling waste management system module
Drilling waste management equipment module

KOSUN is registered in Beijing as an import-export trading company specializing in well-drilling solid control equipments, drilling Rig accessories and mud services in the oil field. KOSUN Oil Service takes charge of the promotion, sales and after-sales service of its products in Chinese market. As one of the main partners of DERRICK in Chinese market, KOSUN Oil Service is available to provide all series of products and accessories of DERRICK to customers in China.

drilling waste management system
drilling waste management system

1. Kosun was established in 1992, the oil field solid control equipment has 25 years of history.
2. Kosun products are exported to Russia, Kazakhstan, Turkmenistan, Azerbaijan, Egypt, Nigeria, Malaysia, Canada, India and Mexico and other 70 countries.
3. Kosun  is one of the earliest manufacturers of ancillary drilling equipment in China and the exclusive manufacturer of oil field solid control equipment.
As China’s first API control of solid control equipment manufacturers.
4.KOSUN has more than 76 patents on solid control and drilling mud waste management equipment.
5. Corson products through the European DNV CE and the Russian TP TP certification.
6.KOSUN Solids America LLC is China’s first US-based solid control company.
7. Kosun management system production in line with HSE system ISO900 and ISO 1: 2008, to ensure your safety products.
8. Kosun  has the right to use the API Q1 logo, is the oil and Sinopec oil drilling equipment and parts of a network provider.
9. The total area of ​​the Solid Control System is more than 70,000 square meters (700,000 square feet).
10. The establishment of after-sales service companies in Kazakhstan and Indonesia and the development of high standards in nearly 20 countries, responsible for sales and after-sales services.
11. KOSUN is SCOMI and BRANDT partners in China.
12.KOSUN has a special equipment for manufacturing vibrating shaker screens in Asia’s largest screen center city.

We are looking forward to cooperation with you.

Posted on

Drill Waste Management Delivery to Foreign Countries

Drill Waste Management

Drill waste management got well appraised by customers at home and abroud.  At the same time ,  a lot of orders come from all over the word.

Drill waste management that from  Kosun received considerable orders from Africa and Russia at the start of new year 2017.

drill waste management equipment
drill waste management

Why drill waste equipment is so popolar by custome
There are below reasons:

  • First and the most thing is high quality
  • strong Research and Development team
  • much more experices
  • Customer Oriented
  • excellent cost performances in using effect and service life.
  • recommend the most suitable products for customers according to their practical requirements
  • Perfect after sale services
  • Drill waste equipment is customized by KOSUN for Kazakhstan  and Russia customers  that has completed production and commissioning work , which will be shipped recently.Drill waste equipment is designed by customers actual needs. In the system design process and equipment configuration on both the cost and processing results.  Achieve the best processing results with the lowest cost under customer requirements.
  • KOSUN is capable of providing customers with such three series as oil & gas drilling solids control equipment, centrifuges and drilling waste treatment equipment, including 25 categories of products, which are extensively used in oil & gas drilling and workover, cutting dryers,  coalbed methane drilling,  vertical cuttings dryer, shale gas drilling, water well, geothermal well drilling, trenchless horizontal directional crossing projects, mine gravel staged treatment, tailings treatment, rive dredging works, industrial wastewater treatment, environmentally friendly sewage treatment, waste oil recovery and purification treatment, etc.
  • Kosun constantly sum up their own shortcomings, strengths and weaknesses，learn more about  experience . Our goal aimes to strive to the world first.  Although there is still a great distance, but we believe that as long as we pay more attention to  do every steps, keep up with the pace of the times, the goal is no longer distant.
Posted on

Drilling Mud Waste Management System Ideal Chosen

Drilling Mud Waste Management

Drilling mud waste management belongs to in Waste Management System.

Kosun drilling waste cuttings unit is a small package for different functions of drilling waste management .

Drilling Mud Waste management
Drilling Mud Waste management

Benefits and Features:

1 Easy to install:  Every modular waste management components are self-contained and used for their own functions. The operator only needs to connect the hose through the quick connection and plug in the power supply module.

2 Fast delivery, price concessions: Although the layout is customized for different applications, but each module unit has a different selection criteria, which allows Kosun to mass production of large quantities of components, and to maintain the module unit inventory. This allows Kosun to give customers a good price for drilling the rapid delivery of waste management components.

3 Flexibility: Accoring to the application, the operator selects the component and provides only the required waste management unit for different jobs. In addition, due to the compact size of the modular unit, the operator can arrange the components at the construction site with the best flexibility.

4 Easy transport: Most rigs are located in remote areas, large transport is very difficult, and waste management components allow the operator to easily load components onto small trucks or longer trucks.

Drilling waste cutting equipment which we produce experience in API, IADC, ISO and CE certification for drilling solid control equipment and drilling waste cutting management equipment for more than 20 years.
The full range of solid control equipment includes settling centrifuge, mud shaker, mud washer, lean oil degasser, pump, mud tank system. Vertical centrifuges and related screw pumps and screw conveyors belong to our drilling waste management equipment business scope.

Not only the supply of drilling waste cuttings  equipment, KOSUN also manufactures and manufactures spare parts for oil and gas related spare parts for drilling as a substitute for the equipment you are currently using.

Posted on

Drilling Waste Management Market of Kosun Manufacturer

Drilling Waste Management Market

Drilling waste management Market of Kosun merge global resources, based on in China market.

The drilling waste management system is used for removing drilling fluids from the drilling cuttings and clean the fluids for resuse, minimize drilling waste to save transportation costs.

1.Oil-based cuttings can decrease OOC by 3% to 5%;
2.and for water-based cuttings,
3. can reduce the water content of each shipment.

Kosun Drilling Waste Management Market
Drilling Waste Management Market

As for the standard drilling waste management unit, which is composed of below: 
1. one vertical cutting dryer
2.1 settling centrifuge
3.two screw pumps for the feed
4.rinsing centrifuge
5.2 or more units
6.A screw conveyor for conveying cuttings
7.a liquid collection tank with vertical cuttings dryer and
telescopic
8.electric cradles 
9.control systems.
10.a dry shaker

KOSUN will  set foot in China market, provide all-around and one-stop oil drilling fluid solids control products and waste treatment products, solutions as well as services with high sense of responsibility and sustainably innovative spirit, maximize the values of staff, customers and shareholders, and take the satisfaction of customer as the eternal pursuit of KOSUN people.

We manufacture Drilling Solids Control Equipment and Drilling Waste Management Equipment for more than 20 years experience with API, IADC, ISO and CE certificated.

Drilling waste functions involves the various procedures of collection, containment and handling of the waste followed by a proper method for its disposal.

Kosun always persist in the two principles: one is Quality First and the other is Customer Oriented.

Kosun provided  a perfect drilling fluid solids control products and drilling waste treatment products, solutions and services with high sense of responsibility and sustainably innovative spirit.

In order to meet for the requirements of international market, KOSUN have got approval of ISO9001, API SPEC Q1, ISO/TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certificates.Russia MIOGE exhibition has got approved UFI and RUEF dual certification.

Kosun will provide better products and services to customer.  We won’t let you down. Welcome to contact us.

 

 

Posted on

Drilling Waste Management System From Famous Brand Kosun

Drilling Waste Management System

Drilling Waste Management System is very popular in the drilling industry.  There are three series:
1.oil & gas drilling solids control equipment
2.drilling waste treatment equipment
3. decanter centrifuges

drilling waste management system
drilling waste management system

Including 25 categories of products which can be provided by Kosun.
They are used in below category:
1.coalbed methane drilling
2.shale gas drilling
3.water well
4.geothermal well drilling
5.trenchless horizontal directional crossing projects,
6.mine gravel staged treatment
7.tailings treatment
8.rive dredging works
9.industrial wastewater treatment
10.environmentally friendly sewage treatment
11.waste oil recovery and purification treatment
12.oil &gas drillingand workover.etc.

drilling waste management system
drilling waste management system

In order to meet  for the requirements of international market, KOSUN have got approval of ISO9001, API SPEC Q1, ISO/TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certificates.

Advantages and Benefits

1.Recovery and Recycling
Reducing, recycling and recovery are key to effective waste management
deal with. We try to recycle and recover, reduce operating costs
As well as the affect on the environment.

2.Processing and Disposal
We provide several processing and handling options to solve your drilling waste need.
They were selected as part of our engineering fluid management
SM process to determine the appropriate action required – given specific fluid types, environmental restrictions and created waste streams

3.Inclusive and Handling
With the increasing pay more attention on environmental protection, the industry is dedicated to safe control and handling of drilling waste.
We share this commitment with the equipment portfolio to mitigate issues related to managing drilling waste,
Reduce environmental compliance issues and promote best practices.

Drilling waste management system not only shorten the drilling time but alos minimize borehole problems and take systematic measures.
Method to carry out the life cycle analysis of the well, can improve and maximize the drilling performance.

Kosun website welcome your coming. We will try our best to provide best service and high quality products. Please don’t hesitate to contact us.  We are happy to assist you.

 

Posted on

Drilling Waste Management System High Quality Low Price From KOSUN

Drilling Waste Management System

Drilling waste  management system is consist of  several sets of equipment for conveying cuttings.

Oil and gas field enterprise solid waste mainly has three kinds: drilling waste mud, cuttings dryer, landing crude oil, sludge and oil sands.

drilling waste management system
drilling waste management system


1, Drilling Waste Mud

(1) Classification: water-based drilling mud, oil-based drilling mud and gas-based drilling mud.

(2) the source:

First, due to changes in geological properties, the mud system to replace the sludge generated, that is not suitable for drilling engineering and geological requirements of drilling mud, drilling process, due to failure of part of the performance was discharged drilling mud ;

Second, after completion of drilling wells in the mud field. That is, the mud in the wellbore which is replaced by the clean water when the well is completed;

Thirdly, the mud which is generated by the leakage of the mud circulation system, that is, the drilling mud discharged by the circulatory system running, dripping, The waste mud yield is 634T / 104m, the discharge volume of drilling mud is about 40 × 104T / year, and the emission rate is about 40%

(4) The main pollutants: hydrocarbons, salts, all kinds of organic polymers, lignin sulfonate, some heavy metals (such as mercury, chromium, copper, lead, arsenic) and barite impurities.

(5) nature: PH value is high, about 8.5 ~ 12, basic; contains a certain amount of weighting agent and chemical treatment agent; some drilling mud contains oil; some contain toxicity (due to drilling formation contains Toxic substances, additives contain toxic substances).

(6) Hazard: high pH, ​​high concentrations of soluble salts and petroleum affect the structure of soil and plant growth hazards; harmful heavy metal ions such as hexavalent chromium, divalent mercury, divalent cadmium, divalent lead and Organic compounds that can not easily be degraded by animals and plants, molecular polymers easily enter the food chain and accumulate in the environment or animals and plants, endangering the health and safety of human beings; organic waste treatment to increase the COD and BOD of aquatic organisms; Normal growth.

Posted on

Drilling Waste Management System from Kosun Equipment

Drilling Waste Management System

Drilling waste management system demand  from below 5 points:
1.optimized solid control,
2.containment and disposal,
3.recycling
4.Recovery
5.treatment and disposal.
But this is not what we offer. 

We provide a complete range of services : maximum range and minimum risk so to meet all your drilling waste management. We offer a premium product warranty maximum reliability with minimum environmental risk.

drilling waste management system
drilling waste management system


To the people: we also offer maximum support from experienced, knowledgeable People – before and after you purchase – anywhere in the world. And by coupling. With a variety of high quality equipment and waste management expertise, we help ensure that maximum compliance with applicable regulations with minimum liability.

From service, you can not only get the comprehensive performance plan for each item, bu t alsp you get one thorough review, completion of a baseline comparative summary, review of established objectives,lessons learned and recommendations for improving future project procedures.

Reflecting the solid control – recovery and reuse, containment and handling of the specific needs of the kit,
Treatment and disposal. Shorten drilling time, minimize borehole problems and take systematic measures.
Method for well life cycle analysis can improve and maximize drilling performance.

We are able to provide our customers with three series of oil and gas drilling solid control equipment, centrifuges and drilling waste treatment equipment, including 25 products, which are widely used in oil and gas drilling and well repairing, CBM drilling, shale gas drilling, Drilling, vertical dryer ,trenchless horizontal directional crossover engineering, ore gravel stage treatment, tailings treatment, river dredging engineering, industrial wastewater treatment, environmental protection sewage treatment, waste oil recovery and purification treatment.
As for the requirements of the international market, Kosun has passed ISO9001, API SPEC Q1, ISO / TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certification.

We are looking forward to your contaction. Welcome !

Posted on

Drilling Waste Treatment Guarantee Quality First by Kosun

Drilling Waste Treatment

Drilling waste  treatment are increasing gradually. Mining and Drilling Waste Processing Oil and gas extraction operations generate a variety of liquid waste streams, including vertical  cuttings dryer  and tailings, which require transport and disposal. For many operations, this mining and drilling waste can become a profit killer. Superabsorbent polymers (SAPs) effectively cure waste without significantly increasing weight or volume to reduce waste transportation and disposal costs.

To provide a fully customized drilling waste management solution, we employ a broad portfolio of modular or mobile technologies to deploy a unique configuration tailored to your operational needs.

From centrifuges to cutting machines, vacuum and conveying systems to heat treatment equipment, we have the right products to solve any challenge, as well as the implementation of the ideal solution by professionally trained personnel.

drilling waste treatment machine
drilling waste treatment machine

Maximizing Drilling Efficiency
By adopting flexible operational, technical and logistical approaches, we are able to balance the complexity of regulatory and economic conditions, design and deploy optimal waste management solutions, and maximize drilling efficiency.

Environmental Leadership
We offer drilling waste solutions that are designed to meet or exceed your project’s environmental regulations. Reducing waste, liquid reuse and advanced cutting treatments all help limit waste transport and reduce the risk of environmental accidents.

Reduce total cost
Efficient solutions help reduce waste processing time, transport and handling, and help ease logistics challenges. Our custom  drilling waste solutions are designed to deliver these efficiencies and help you reduce the total cost of your oil well operations.

Kosun is an international brand of solid control and drilling waste management equipment manufacturers with extensive experience and global service.

Branch-will serve wholeheartedly for domestic and foreign customer service, with strong technical strength and perfect after-sales service system. Branch-look forward to your negotiations and cooperation!

Kosun has the confidence to provide more cost-effective equipment and mud systems in 2017.