drilling waste management, Author at Drilling waste management,oil based mud treatment,drilling mud circulation system,drilling waste management companies

11/27/202111/27/2021

Oil-based drill cuttings reduction processing system

Oil-based drilling cuttings is a kind of oilfield drilling fluid, also called oil-based mud, which includes oil as the continuous phase, water volume content up to 50% as the dispersed phase, emulsifier as stabilizer and water-in-oil emulsified drilling fluid and A drilling fluid usually made of diesel oil, oxidized asphalt, organic acids, alkalis and other chemical agents. Oil-based drilling fluid has the advantages of high temperature resistance, salt and calcium corrosion resistance, and is beneficial to the stability of the borehole wall, good lubricity, and less damage to the oil and gas reservoirs. At present, it has developed into an important method for drilling high-temperature wells, deep wells and other high-difficulty wells and various complex formations, but the preparation cost is much higher than that of water-based drilling fluids.(Oil-based drill cuttings reduction processing system)

Oil-based drill cuttings treatment usually adopts a special “oil-based drill cuttings zero discharge system“. The system is composed of screw conveyors, drill cuttings dryers, environmentally friendly centrifuges and other equipment, supporting the mud solids control system to achieve mud processing while drilling, replacing the traditional methods of using filter presses or mud tanks, greatly improving economic and environmental benefits, it is widely used in oilfield drilling.

After the oil-based drilling cuttings pass through the special oil-based mud zero discharge treatment system, it can process 40 tons of oil-based drilling cuttings per hour without adding any chemicals. The oil-base oil content of the drilling cuttings is controlled by 5% to 8%; the well is truly realized. “No pooling”, “reduction” and “zero emissions” and “zero additions” requirements for the field.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 18792396268
Contact person: Lily Wang
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

11/27/202111/27/2021

Equipment composition of oil-based mud zero discharge system

The equipment of the oil-based mud zero discharge system includes: high-speed drilling fluid centrifuge (with screw pump), drill cuttings dryer (also known as cuttings drying machine, drilling cuttings drying machine), dosing device, Screw conveyor, cuttings box.

KOSUN’s oil-based mud zero discharge system is simple in structure, easy to maintain, and has good treatment effects. It is the leader in environmentally friendly treatment of drilling waste mud. At present, the number of wellheads using oil-based drilling fluids is increasing, and there are more and more waste oil-based drilling fluids. It is very important to treat and dispose of waste oil-based mud from drilling in a timely and harmless manner.

KOSUN oil-based mud zero discharge system processing process: the drilling fluid mud to be processed is transported to the cuttings dryer (cuttings drying machine, drilling cuttings drying machine), and the treated drilling fluid mud is transported to the drilling fluid centrifuge for further processing, and the mud liquid after the drilling fluid centrifuge treatment is re-injected into the mud circulation system. The treated waste is transported to the cuttings box.

10/27/202110/27/2021

Petroleum Solids Control Mud Tank

The Petroleum Solids Control Mud Tank is used to store the mud transported between the drilling wellhead and the mud pump. Petroleum Solids Control Mud Tanks are often referred to as mixing tanks, storage tanks or supply tanks.

Petroleum solids control mud tanks can be divided into replenishment tanks, metering tanks, trailer-mounted mud tanks, cooling tanks, etc. according to different uses. The Petroleum solids control mud tank adopts electric centralized control, and its manifolds are built-in manifolds, which are convenient for installation, disassembly and transportation. In extreme low temperature areas, the tank body is equipped with a heating system and a heat preservation system.

KOSUN Petroleum solids control mud tank adopts centralized electric control; heating and heat preservation system applied for tank body in polar regions. When used in drilling blocks, KOSUN Petroleum solids control mud tank has the following advantages: ensuring no mud loss, reducing environmental pollution, lowering labor intensity and satisfying drilling requirements timely through mud mixing. KOSUN can also design and manufacture mud tanks according to customers’ specific requirements.

09/28/202109/28/2021

Cost-effective shield Muck Treatment Equipment

As the country’s requirements for environmental protection are increasing, the construction waste generated during the vigorous development of urban and rural areas, especially the treatment of shield dregs, has become a problem faced by urban managers. How to carry out efficient shield dregs treatment and the effective protection of the environment has become a problem that needs to be solved urgently in urban development.

KOSUN has very rich experience in infrastructure construction, mud water treatment and other industries. As a professional shield muck treatment equipment manufacturer, it has developed a safe, environmentally friendly, efficient and cost-effective shield muck treatment price. Shield muck treatment equipment, which uses a belt conveyor system to transport the newly excavated muck from the depths of the tunnel to the hopper of the ground muck separation system. The final separated coarse sand and fine sand are lifted through the belt. The machine is transported to the truck for transportation, dewatering, separating and drying the muck in stages, which effectively solves the problem of muck transportation, realizes the reuse of inorganic raw materials and water resources, realizes the recycling and reuse of the muck, and protects the environment at the same time.

At present, the shield muck treatment equipment produced by KOSUN has been put into use in many places across the country, especially in the Guangzhou shield muck treatment market, which has obtained good feedback. KOSUN can customize suitable and economical shield muck treatment equipment for customers based on customer needs and combined with the actual situation on the site. Customers are welcome to consult.

08/16/202108/16/2021

Water-based Mud zero discharge and oil-based Mud zero discharge

Oil-based Mud zero discharge mainly for directional wells and ultra-deep wells. Directional wells and ultra-deep wells require an oil-based mud system to prepare the mud. The oil-based mud contains expensive diesel or white oil, and the oil-based drilling solids control system treats the oil-based mud. If the drilling cuttings still contain oily mud, if the mud is not treated on the ground, the mud will be wasted and the drilling cost will increase.

Water-based Mud zero discharge mainly for shallow wells. Water-based mud is mainly prepared by adding chemicals or industrial salt to the soil. The solids control system uses water-based mud drilling system. The drilling waste generated by the water-based mud drilling system also contains effective mud. Disposal will also cause waste of mud, which needs to be recycled without mud disposal.

Mud zero discharge is the key to drilling waste treatment. It is the result of improved drilling technology, replacing traditional mud pools, reducing drilling environmental pollution and improving the necessary methods for environmental protection. The current Mud zero discharge includes water-based Mud zero discharge and oil-based Mud zero discharge. The two methods of Mud zero discharge are determined according to the mud treatment system adopted in the drilling.

Mud (drilling fluid), which is used to lubricate the drill bit, cement the well wall and cool down during the drilling process. In the whole drilling process, mud is of great significance to reduce drilling accidents and improve drilling efficiency. Generally, water-based mud systems and oil-based mud systems are mainly used in drilling sites.

However, the Mud zero discharge through the secondary filtration separation and recovery of drilling waste, which directly saves a lot of drilling mud, especially oil-based mud. Therefore, Mud zero discharge is the key to drilling solids control and drilling waste disposal.

07/28/202107/28/2021

Construction Waste treatment and reuse

Under the new pattern of circular economy, how to dispose of construction waste(Construction Waste treatment) with an annual increase of billions of tons has become one of the problems that the industry urgently needs to solve. In recent years, with the acceleration of urban construction and renovation, the problems of construction waste pollution and garbage siege have become increasingly prominent. In terms of inventory, the current increase in domestic construction waste reaches about 3.5 billion tons per year.

According to the source of construction waste, it is mainly divided into land excavation waste, road excavation waste, old building demolition waste, construction waste and building material waste. The demolition phase of buildings and the construction phase of new buildings are the key points for the control of construction waste. The demolition of old buildings and new construction accounted for 58% and 36%.

At present, our country’s treatment of construction waste is still in the relatively extensive landfill and stacking stage. In fact, construction waste is a renewable resource. After scientific recycling, separation, screening, and smelting, it can completely turn waste into treasure to restore its original performance, and reuse it as a renewable raw material. However, transforming construction waste into qualified, high-quality aggregates that can replace natural sand and gravel, and then into market-recognized products, is the biggest challenge facing companies.

07/21/202107/21/2021

Mud Circulation System in Well Site “Green Drilling”

Drilling engineering is a field operation engineering in oil and gas exploration and development activities. During drilling production, “waste slurry, waste water, waste oil”, rock cuttings, production and domestic garbage and other wastes inevitably cause pollution and harm to the surrounding environment. Therefore, vigorously promote the “green drilling” mud circulation system, actively realize sustainable development, establish green environmental protection awareness, control pollution from the source, and realize green environmental protection for oil and gas exploration and development.

“Green drilling” refers to the drilling process that focuses on pollution prevention, minimizes the consumption of raw materials and energy, reduces production costs, and reduces and prevents damage to the ecological environment during the drilling process.

In order to bring the broken cuttings of the bottom hole drill bit to the ground in time to continue drilling, and to cool the drill bit to protect the well wall and prevent the occurrence of drilling accidents such as well collapse and lost circulation, the rotary drilling rig is equipped with a mud circulation system. The mud circulation system includes drilling pumps, ground manifolds, mud tanks, mud purification equipment, etc. The ground manifolds include high-pressure manifolds, risers, and hoses, and mud purification equipment includes drilling fluid shakers, de-sanders, and desilters , Centrifuges, etc.

06/29/202106/29/2021

Oilfield Drilling Waste Mud Treatment Process and Equipment

Waste drilling mud is one of the main pollution sources in the petroleum and natural gas industry. The Oilfield Drilling Waste Mud Treatment Process is to treat the waste drilling mud (drill cuttings) immediately while drilling to meet the requirements of “mud zero discharge” and reduce environmental pollution. This technology is to dilute, flocculate and separate the waste mud into rock debris, mud cake and water, and process the solids in the mud through water washing, flocculation separation and chemical reaction to make the rock debris and mud cake meet the discharge standard.

The Oilfield Drilling Waste Mud Treatment main equipment includes: shale shaker, drill cuttings dryer, drilling fluid centrifuge, screw conveyor, screw pump, etc. KOSUN’s zero discharge mud system can effectively control the water content of drilling cuttings (6%-10%) in the drilling mud, stabilize the liquid phase performance, and achieve the purpose of mud zero discharge.

There are many kinds of waste mud treatment processes in oilfield drilling. Each treatment plan needs to be determined according to the drilling site and drilling construction conditions. It must not only achieve the treatment effect, but also meet the national environmental protection requirements, and strive to achieve harmless treatment. It plays an active role in improving and protecting the environment, soil and groundwater.

06/28/202106/28/2021

KOSUN Mud Zero Discharge System Processing Flow

The Mud Zero Discharge System developed by KOSUN mainly includes shale shaker, centrifuges, cuttings dryers, and screw conveyors. After processing, it can reach an oil content about 2-5%, which is in line with national and industry standards.

After dewatering centrifuge separation and multifunctional purification unit, the harmful part of the mud is discharged with the solid phase. The liquid phase can be used to prepare the mud, discharge as wastewater or irrigate, and the solid part is solidified and then landfilled.

On-site centralized processing while drilling, using physical centrifugal separation technology to recover most of the base oil on-site, reducing the oil content and total amount of waste (the solid phase oil content of the spin dryer is 2%-12%, and the solid phase oil content of the centrifuge is about 13%, the treated solid phase is transported to the centralized treatment station for further treatment, and the liquid phase is returned to the circulation system for use. The advantage of on-site centrifugal deoiling while drilling is that it reduces the total amount of waste at the source, recovers reusable oil-based mud, and the treated waste is easy to store and transport, which greatly reduces the time and energy consumption of subsequent processing.

05/29/202105/29/2021

KOSUN Comprehensive Drilling Waste Treatment Solution

Solid-liquid separation is an important part of the drilling waste treatment process. The smaller the proportion of the water content in the waste, the smaller the volume of the remaining solids, and the smaller the required treatment cost, which can effectively control the treatment cost and reflect economic benefits. In recent years, domestically developed orifice plate filter presses, filter belt dewatering conveyors, horizontal screw centrifuges and other dewatering devices have promoted the improvement of drilling waste treatment technology.

This kind of treatment route is to let the sewage pond that collects wastes settle naturally first , and perform conventional sewage treatment on the free water produced after natural settlement; at the same time, add flocculants and coagulants to the sludge part for chemical destabilization treatment, and then pass it through dewatering devices such as centrifuges, filter belt dehydrators, orifice plate filter presses further separate solids and liquids, and finally solidify and treat the separated solids and moisture respectively, thereby completing the elimination of drilling and completion waste fluids. Harmful treatment. In this scheme, since the dehydration device is still in the trial stage, the degree of automation is not high and the efficiency is low.

Therefore, to improve efficiency, it is necessary to reduce from the source, and to simultaneously treat waste during the drilling process. After fully drawing on some advanced foreign experience, combined with the on-site situation of the drilling site in the country. KOSUN, a manufacturer of oil drilling equipment and solids control equipment, has formulated a comprehensive drilling waste treatment solution for customers. The program starts from the source through four major steps of solids control equipment-dehydration/water treatment/water recycling/filtering-mud recovery-solidification/biodegradation/thermal analysis/drill cuttings reinjection.