drilling waste management, Author at Drilling waste management,oil based mud treatment,drilling mud circulation system,drilling waste management companies

05/16/202405/16/2024

Drilling fluid vibrating screen is a solid control equipment in drilling mud solid phase control system

Xi ‘an KOSUN oil solid control drilling fluid vibrating screen is the primary solid control equipment in the drilling mud solid phase control system. It separates a large amount of drilling cuttings carried by the mud from the well sheet so that the mud can enter the secondary separation equipment. The screen can be used alone, or can be used in double or multiple pairs.

Xi ‘an KOSUN oil solid control drilling fluid vibrating screen is a high frequency linear vibration machine, it is equipped with three screen frames and two vibration motors, and has the characteristics of manual adjustment of screen frame angle (AWD) during drilling, LS583 vibrating screen can be operated between -1° and +5° adjustment screen frame angle. Thanks to structural design innovations, drilling fluid shakers can efficiently separate cuttings. The vibration motor is fixed to the screen frame with a high-strength support beam and positioned on the screen bed. By positioning the vibration motor in this way, the vibration force (G-force) can be directly applied to the screen. The vibration isolation device can protect the base frame from the vibration of the screen frame. The mud is fed through the feed box into the shaker.

The main components of Xi ‘an KOSUN oil solid control drilling fluid vibrating screen include screen frame, vibration motor, screen tensioning system, AWD Angle adjustment system, locking device, feed box, electrical system, etc.

Xi ‘an KOSUN drilling fluid vibrating screen is widely used in oil drilling, trenchless horizontal directional crossing, coalbed methane drilling, shale gas drilling, river sludge environmental protection and other mud purification treatment fields.

05/14/202405/14/2024

Introduction to sand and mud removal cyclones

The material of the mud removal cyclone is polyurethane, and the material of the sand settling port is polyurethane + KM wear-resistant coating. The mud removal cyclone is equipped with three specifications of underflow ports: Φ14, Φ18, and Φ22. The appropriate specification should be selected according to different mud conditions. The feed pressure should be controlled between 0.08-0.30 MPa.

The material of the sand removal cyclone is a steel shell lined with rubber, and the material of the sand settling port is high-alumina ceramic. The sand removal cyclone is equipped with three specifications of underflow ports: Φ70, Φ80, and Φ90. The appropriate specification should be selected according to different mud conditions. The feed pressure should be controlled between 0.03-and 0.40 MPa.

Storage precautions for polyurethane cyclones:

The rubber lining components of the cyclone should not be exposed to direct sunlight for a long time during storage because strong ultraviolet rays can cause the aging of these materials. The equipment should be stored indoors as much as possible. If stored outdoors, it should always be covered with tarps or other protective layers.
The equipment should be placed in a safe environment to avoid falling objects or heavy objects, preventing damage to the equipment.
The equipment should be kept away from corrosive liquids or fumes.
The equipment should be kept away from high temperatures, direct flame, and welding.

04/26/202404/26/2024

Drilling Mud Waste Management is a Critical Aspect of the Drilling Process

Drilling mud waste management is a critical aspect of the drilling process that requires careful attention to ensure environmental protection and compliance with regulations. When disposing of drilling mud waste, several key factors should be carefully considered to minimize environmental and human health impacts.

First, attention must be paid to the composition of drilling mud waste. Drilling mud typically contains a mixture of water, clay and various chemicals. Understanding the specific composition of waste is critical to determining the most appropriate disposal method. Some drilling mud waste may be classified as hazardous waste due to the presence of toxic chemicals, heavy metals, or other hazardous materials. In such cases, special handling and disposal procedures may be required to prevent contamination of soil and water sources.

Another important consideration in the drilling mud waste management process is the selection of an appropriate disposal site. It is crucial to choose a location that complies with local regulations and environmental guidelines. The site should be equipped with facilities capable of handling the quantities and types of waste to be disposed of, and measures should be in place to prevent contaminants from leaching into the surrounding environment.

Additionally, disposal methods are a key aspect to consider. There are many options for drilling mud waste disposal, including land application, injection wells, and disposal and discharge. Each method has its own set of requirements and potential environmental impacts. It is important to carefully evaluate the best disposal methods based on the specific characteristics of the waste and local environmental conditions.

Additionally, proper documentation and record keeping is critical during drilling mud waste disposal. Keeping detailed records of waste composition, disposal methods and disposal locations is important for regulatory compliance and environmental monitoring.

In conclusion, drilling mud waste management requires special attention to ensure environmental protection and regulatory compliance. The potential environmental impact of drilling mud waste can be minimized by understanding the composition of the waste, selecting an appropriate disposal site, selecting the correct disposal method, and maintaining complete documentation. It is critical for companies involved in drilling operations to prioritize responsible waste management practices to protect the environment and public health.

KOSUN- China Solids Control Leader&Drilling Waste Management Expert
Email: sales2@adkosun.com
WhatsApp/Wechat:+86 13379250593
Contact person: Monica Li
Online consulting:
http://www.kosun.com
http://www.kosuneco.com

04/15/202404/15/2024

Improving oil drilling efficiency with KOSUN drilling mud system

In the oil and gas industry, the efficiency and effectiveness of drilling operations are critical to success. A key component that plays an important role in this process is the drilling mud system. Kosun Machinery is a leading supplier of oil drilling mud systems, offering a comprehensive range of equipment designed to optimize the solids control process and improve overall drilling performance.

KOSUN oil drilling mud system is a multi-tank system, also known as solid control system or mud circulation system. It is specially designed for oil and gas drilling rigs, catering to various rig sizes from 250HP to 3000HP and different capacities. This versatility ensures that KOSUN’s mud systems can meet the specific requirements of different drilling operations, providing tailor-made solutions for optimal performance.

The core components of the KOSUN oil drilling mud system include a series of solids control equipment, each of which has a specific purpose in the solids control process. The system includes a slurry shaker for primary solids control, capable of handling particles as small as 100 microns. In addition, it has a desander for second phase solids control, for cuttings as small as 40 microns, and a desander for third phase solids control, for cuttings as small as 20 microns. To further enhance the separation of fine solids, the system is equipped with a decanter centrifuge capable of effectively separating particles in the 2-7 micron range.

By integrating these advanced components into a comprehensive mud system, KOSUN Machinery enables drilling operators to effectively manage and control drilling mud, ensuring it meets the specifications required for optimal drilling performance. This not only improves the overall efficiency of the drilling process but also helps with cost savings and environmental compliance.

Overall, the KOSUN Oil Drilling Mud System is a testament to the company’s commitment to providing high-quality, tailor-made solutions to the oil and gas industry. With a focus on efficiency, performance and reliability, Kosun Machinery’s mud systems are valuable assets to any drilling operation, optimizing solids control and increasing overall drilling efficiency.

03/21/202403/21/2024

Changqing Oil Drilling Cuttings Treatment Case

After drilling and completion of more than 20 oil Wells in Longdong main oil area of Changqing Oilfield, more than 8,000 tons of downhole cuttings generated from the production site were transported to the local Qingcheng brick making enterprise for secondary utilization to make sintered bricks, thus solving the problem of comprehensive treatment of drilling waste in oilfield development and realizing the safe and environmental protection resource utilization of water-based cuttings. This is only a microcosm of the industrial reapplication of oil and gas drilling cuttings to save energy and reduce consumption.

Effective utilization of solid waste resources is the best way to dispose drilling cuttings. In the early stage, since the “collection while drilling” treatment of drilling waste in Changqing Oilfield, the cost of outsourcing drilling cuttings is high, and the disposal occupies a lot of land, and there is a large safety and environmental protection risk. The relevant technicians selected nearly 100 oil and gas Wells in the whole oil and gas field according to different regions, formations and drilling fluid systems for sampling while drilling, and the test results all showed that water-based drilling cuttings were general industrial solid wastes. Researchers have carried out detailed analysis and testing of drilling cuttings, and innovated a variety of resource utilization ways such as paving of cuttings, paving well sites and making brick from cuttings, and improved the geotechnical properties of drilling cuttings, forming the drilling cuttings adding a certain proportion of lime and fly ash, which can meet the requirements of paving well sites and roadbed. By analyzing the characteristics of the cuttings, the additive formula of the cuttings free brick is overcome, which is based on ordinary Portland cement and supplemented by water-based epoxy resin. At the same time, the firing process of the cuttings, clay and coal gangue of the sintered brick is studied.

Changqing Oilfield has made a breakthrough in the non-landing disposal technology of rock cuttings to make the drilling site clean. The treatment process of “miscible collection + rubber breaking and destability + plate and frame press filtration” was established to achieve the maximum solid-liquid separation and the solid water content was less than 75%. To solve the problem of low pressure filtrate recovery rate after plate and frame filtration, in order to recycle liquid phase between Wells or well sites, an integrated treatment agent with a variety of mixtures was developed. The liquid phase recovery rate was greater than 65%, meeting the Class I industrial solid waste, solving the contradiction between mud non-landing process and drilling production, and fully realizing the transformation and upgrading from “in-situ curing” to “clean” treatment.

At present, the disposal and resource utilization technology of drilling cuttings in Changqing Oilfield has reached the industry standard in terms of pollution control, process design and operation management involved in the resource process of water-based drilling cuttings and liquid phase, and has realized the full coverage of safe and environmental protection disposal of drilling mud in Sulige, Yulin, Yan ‘an and other places in Changqing oil and gas area. It has obtained 5 invention patents, introduced 3 Changqing oilfield standards and 1 industry standard, further standardized the resource utilization of solid waste in oil and gas fields, reduced regional environmental risks, and turned waste into treasure after millions of square drilling cuttings and oily sludge treatment in oil fields.

03/21/202403/21/2024

What are the drilling methods?

Jet drilling
The high-pressure mud transported by the mud pump forms a high-speed impact jet (usually above m/s) through the drill bit nozzle, which directly acts on the bottom of the well, making full use of hydraulic energy (generally more than 50% of the pump water power acts on the bottom of the well), so that The cuttings are washed away from the bottom of the well in time or the formation is directly broken, which can greatly increase the drilling speed. A reasonable way to work is to use higher pump pressure, lower displacement and smaller drill nozzle diameter. Optimized parameter drilling is based on the analysis of drilling data, using electronic computers as a means, and using optimization methods to combine various controllable factors that affect the drilling speed (such as drill bit type, bit weight, rotation speed, mud performance, hydraulic factors, etc. ), establish a mathematical model and compile a calculation program based on the lowest cost principle. Optimal cooperation is carried out to achieve high-quality, fast and low-cost drilling work.
Formation pore pressure prediction and balanced pressure drilling
Use seismic, logging and drilling data (mechanical penetration rate, shale density, mud gravity, temperature, etc.) to conduct comprehensive analysis to predict formation pore pressure and determine possible abnormal pressure formations, and take timely measures to prevent sudden occurrences Complex underground situations such as blowout, lost circulation and well collapse. Based on the known formation pore pressure and formation fracture pressure, determine reasonable mud specific gravity and casing procedures. Drilling under conditions where the mud column pressure and formation pore pressure in the well are approximately balanced is called balanced pressure drilling. It can significantly increase the drilling rate and is also beneficial to the discovery of oil and gas reservoirs. Well control technology: When drilling into abnormally high-pressure formations and mud gas invasion or well kick occurs, calculation methods and appropriate technical measures are used to adjust the mud proportion and flow characteristics, and use hydraulic high-pressure blowout prevention equipment to control and eliminate well overflow. , to prevent blowouts.
Core taking technology
According to the design requirements, rock samples (cores) of the required layers are drilled from underground to obtain primary data for the exploration and development of oil and gas reservoirs. Commonly used coring tools are mainly composed of core drill bits, core barrels, core grabs, joints and other components. During coring drilling, the drill bit continuously cuts the rock at the bottom of the well in an annular shape, so that the drilled columnar core continuously enters the core barrel. In order to meet special needs, there are also closed coring, pressure maintaining coring and coring tools (rubber sleeve coring tools) for extremely loose and broken formations.

03/14/202403/14/2024

The vacuum degasser is a new type of special equipment used to deal with gas intrusion into drilling mud

The vacuum degasser is a new type of special equipment used to deal with gas intrusion into drilling mud. During the drilling process, it plays an important role in restoring mud specific gravity and stabilizing mud performance. This innovative technology revolutionizes the way gas intrusion drilling mud is managed, providing the oil and gas industry with a more efficient and effective solution.

Gas intrusion in drilling mud can cause various problems such as reduced drilling efficiency, formation damage, and wellbore instability. Vacuum degasser solves these challenges by removing entrained gases such as methane, carbon dioxide and hydrogen sulfide from drilling fluids. This process helps maintain the integrity of the mud, ensuring it can effectively carry cuttings to the surface and provide adequate support for the wellbore.

The working principle of the vacuum degasser is to create a low-pressure environment in the container to separate the gas from the mud. This is accomplished through the use of a vacuum pump, which draws the gas-laden slurry into a degassing unit. Once inside, the slurry is agitated to release the entrained gas, which is then expelled from the system. The degassed mud is then returned to the mud circulation system, ready to continue its role in the drilling process.

One of the main benefits of using a vacuum degasser is its ability to improve the overall performance of the drilling mud. By removing entrained gas, the mud’s specific gravity is restored, ensuring it can effectively suspend and transport cuttings. This helps maintain wellbore stability and prevent problems such as kicks and blowouts. In addition, the removal of gas enhances the rheological properties of the mud, ensuring that it maintains its desired properties throughout the drilling operation.

Overall, vacuum degassers have become an indispensable tool in the oil and gas industry, providing a reliable and efficient means of managing gas intrusion into drilling muds. Its ability to restore mud gravity and stabilize mud properties makes it a valuable asset in ensuring a successful drilling operation. As technology continues to advance, vacuum degasser will play an increasingly important role in optimizing drilling processes and improving overall operational efficiency.

03/14/202403/14/2024

Sand pumps are important equipment used to transport slurry in various industrial applications

Sand pumps are important equipment used to transport slurry in various industrial applications. It plays a vital role in the efficient movement of mud, making it an indispensable tool in the drilling and mining industry. Sand pumps are designed with a range of features that make them functional and efficient.

One of the key components of the sand pump is the impeller, which adopts a closed design to ensure high transmission efficiency. This design allows for seamless movement of slurry, allowing the pump to handle large volumes of material with ease. The efficient operation of the impeller helps improve the overall performance of the sand pump, making it a reliable choice for demanding applications.

In addition to the impeller, the sand pump is also equipped with a highly wear-resistant carbide mechanical seal. The seal is designed to withstand the wear and tear of mud, ensuring a long service life for the pump. The wear-resistant properties of the seals make sand pumps suitable for continuous operation in challenging environments, providing durability and reliability in slurry transfer.

In addition, the versatility of sand pumps is highlighted by their ability to serve as injection pumps or downhole supply pumps for drilling rig mud pumps. This flexibility allows the pump to adapt to different operating requirements, making it a versatile solution for a variety of slurry transfer needs. Whether used as an injection pump or downhole supply pump, sand pumps provide consistent performance and reliability when handling mud.

Overall, sand pumps are important equipment for efficiently transporting slurry in industrial environments. Its advanced features, including a closed impeller design, highly wear-resistant mechanical seal and versatility, make it a valuable asset in applications where reliable mud movement is essential. With high transfer efficiency and long service life, sand pumps are a reliable solution for transporting slurry in harsh industrial environments.

02/07/202402/07/2024

KOSUN is one of the top-ten solid control companies with independent design and production capacity

Xi’an KOSUN is a professional solid waste equipment manufacturer that has long been committed to resource conservation and environmental protection. Based on the manufacturing of environmentally friendly separation machinery and equipment, it provides solid waste treatment-related products and services in the petroleum and petrochemical, It is applied in six major fields including engineering machinery, industrial sludge treatment, river and lake sludge and urban sludge treatment and disposal, soil remediation, and comprehensive utilization of tailings. The products serve more than 50 countries and regions around the world.

Xi’an KOSUN’s main products:

Solid control equipment: drilling fluid shale shaker, desander, desilter, mud cleaner, decanter centrifuge, vacuum degasser, mud mixer, jet mixing device, liquid-gas separator, sand pump, screw pump, mud tanks, etc.
Solids control system: skid-mounted solids control system, low-temperature solids control system, desert mud solids control system, mobile solids control system.
Drilling waste treatment: vertical cuttings dryer, screw conveyor, drying screen, oil-based mud treatment system, water-based mud treatment system, oily sludge treatment system.
Engineering construction mud treatment: shield mud-water separation system, shield mud treatment system, trenchless mud recovery system, etc.

01/25/202401/25/2024

Description of Petroleum Drilling Mud Circulation System Process

The petroleum drilling mud circulation system is a system used in the process of petroleum drilling to circulate and treat drilling mud. The main purpose of this system is to maintain wellbore pressure, cool the drilling bit, suspend drill cuttings, lubricate the drilling tools, and separate drill cuttings and other solid particles to ensure a smooth drilling process.

The petroleum drilling mud circulation system typically consists of wellhead equipment, solid control equipment, liquid phase treatment equipment, pump station system, and control system.

The mud returned from the wellbore is transported to the shale shaker and mud cleaner on the tank via the return line (elevated trough and support) either separately or simultaneously. After being processed by the shale shaker, the mud first goes to the sand settling tank for sedimentation. The settled mud then enters the vacuum degasser for degassing, and the degassed mud goes into the desilter. The desilter pump draws the mud from the desilter to feed the desilter cyclone, and the mud processed by the desilter cyclone enters the desander. The desander pump draws the mud from the desander to feed the desander cyclone, and the mud processed by the desander cyclone enters the mud mixing tank. The mixing pump draws the mud into the centrifuge feed pump tank, and the centrifuge feed pump supplies the mud to the centrifuge for solid-liquid separation. The mud processed by the centrifuge enters the matching tank. The mud processed by the centrifuge can be adjusted for its properties using the weighting pump and weighting hopper, and the mud with adjusted properties is then used through the mud pump pipeline and suction of the mud pump. This completes a large circulation of drilling fluid purification.

The design and configuration of the petroleum drilling mud circulation system may vary depending on different drilling conditions, well depths, and drilling objectives. Through proper system design and operation, efficient, safe, and environmentally friendly drilling processes can be achieved.