Drilling Waste Management System High Quality Low Price From KOSUN

Drilling Waste Management System

Drilling waste  management system is consist of  several sets of equipment for conveying cuttings.

Oil and gas field enterprise solid waste mainly has three kinds: drilling waste mud, cuttings dryer, landing crude oil, sludge and oil sands.

drilling waste management system
drilling waste management system


1, Drilling Waste Mud

(1) Classification: water-based drilling mud, oil-based drilling mud and gas-based drilling mud.

(2) the source:

First, due to changes in geological properties, the mud system to replace the sludge generated, that is not suitable for drilling engineering and geological requirements of drilling mud, drilling process, due to failure of part of the performance was discharged drilling mud ;

Second, after completion of drilling wells in the mud field. That is, the mud in the wellbore which is replaced by the clean water when the well is completed;

Thirdly, the mud which is generated by the leakage of the mud circulation system, that is, the drilling mud discharged by the circulatory system running, dripping, The waste mud yield is 634T / 104m, the discharge volume of drilling mud is about 40 × 104T / year, and the emission rate is about 40%

(4) The main pollutants: hydrocarbons, salts, all kinds of organic polymers, lignin sulfonate, some heavy metals (such as mercury, chromium, copper, lead, arsenic) and barite impurities.

(5) nature: PH value is high, about 8.5 ~ 12, basic; contains a certain amount of weighting agent and chemical treatment agent; some drilling mud contains oil; some contain toxicity (due to drilling formation contains Toxic substances, additives contain toxic substances).

(6) Hazard: high pH, ​​high concentrations of soluble salts and petroleum affect the structure of soil and plant growth hazards; harmful heavy metal ions such as hexavalent chromium, divalent mercury, divalent cadmium, divalent lead and Organic compounds that can not easily be degraded by animals and plants, molecular polymers easily enter the food chain and accumulate in the environment or animals and plants, endangering the health and safety of human beings; organic waste treatment to increase the COD and BOD of aquatic organisms; Normal growth.

Drilling Waste Management System from Kosun Equipment

Drilling Waste Management System

Drilling waste management system demand  from below 5 points:
1.optimized solid control,
2.containment and disposal,
3.recycling
4.Recovery

5.treatment and disposal.

But this is not what we offer. 

We provide a complete range of services : maximum range and minimum risk so to meet all your drilling waste management. We offer a premium product warranty maximum reliability with minimum environmental risk.

drilling waste management system
drilling waste management system


To the people: we also offer maximum support from experienced, knowledgeable People – before and after you purchase – anywhere in the world. And by coupling. With a variety of high quality equipment and waste management expertise, we help ensure that maximum compliance with applicable regulations with minimum liability.

From service, you can not only get the comprehensive performance plan for each item, bu t alsp you get one thorough review, completion of a baseline comparative summary, review of established objectives,lessons learned and recommendations for improving future project procedures.

Reflecting the solid control – recovery and reuse, containment and handling of the specific needs of the kit,
Treatment and disposal. Shorten drilling time, minimize borehole problems and take systematic measures.
Method for well life cycle analysis can improve and maximize drilling performance.

We are able to provide our customers with three series of oil and gas drilling solid control equipment, centrifuges and drilling waste treatment equipment, including 25 products, which are widely used in oil and gas drilling and well repairing, CBM drilling, shale gas drilling, Drilling, vertical dryer ,trenchless horizontal directional crossover engineering, ore gravel stage treatment, tailings treatment, river dredging engineering, industrial wastewater treatment, environmental protection sewage treatment, waste oil recovery and purification treatment.
As for the requirements of the international market, Kosun has passed ISO9001, API SPEC Q1, ISO / TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certification.

We are looking forward to your contaction. Welcome !

Drilling Waste Treatment of Pit Less Mud System by Kosun

Drilling Waste Treatment

Drilling waste  treatment  of pit Less Mud system,  is a very important thing that is required to maintain is a proper integration between the drilling waste management system and solid maintaining process.

Oil and gas drilling is one of the most prolific business now a days. A very complex mechanism is used to drill oil and gas from the mine. A very common equipment that is seen in oil and gas drilling area is a shale shaker.

There are two basic approaches of drilling using shale shakers .
The first one is the solid control system which is very popular for drilling now a days.
The second approach is the pit less mud system for drilling. Today the focus will be given on the pit less mud system for drilling.

Drilling waste treatment for sale
Drilling waste treatment

What is pit less mud system for drilling: The pit less mud system for drilling is basically a process in which no pit is dug on the surface while for collecting cuttings from drilling.

When the drilling waste cuttings are taken out from shell shaker, two particular equipments named G force drying shaker and vertical cutting dryer are used to extract the liquid and to make the cuttings drier. After that, the dry cuttings are transported from the shale shaker unit to the disposal unit. In that stage, the waste cuttings can be disposed on the surface without digging any pit. In many oil and gas drilling sites, a more environment friendly approach is taken to dispose drilling waste cuttings .

In that case, the drilling waste cuttings are taken to another unit for the final processing. In this unit, the waste cuttings are processed via solidification process. Waste cuttings can also be processed by thermal desorption machine. Thus, the drilling waste cuttings become contamination free and environment friendly. Then, the waste cuttings can be disposed without any fear.

Drilling Decanter Centrifuge Performance of Kosun

Drilling Decanter Centrifuge

The main part of a Drilling waste management system is the decanter centrifuge. Decanter centrifuge is typically used for treatment of waste water, separation of slurry and sludge from oil etc. here are some ways to maximize the performance of a decanter centrifuge :
•    It can be operated along with a Hi-g drying shaker for treating water based drilling waste or cuttings. After treating the waste with shakers, the mass is sent out into the decanter centrifuge for separating fine solids.

drilling decanter centrifuge
drilling decanter centrifuge

•    Vertical cutting dryers are widely used in almost every drilling field. Using decanter centrifuge along with vertical dryer will help in treating oil based and synthetic based drilling waste . The cuttings are first treated in shale shakers, then in vertical dryers and then go onto the decanter centrifuge.
•    Choosing the correct type of decanter centrifuge is also of utmost importance. Details of the equipment must be discussed with the supplier and the manufacturer. Operators can get a rough idea about the working performance and efficiency by looking through the data of machines in similar conditions.
•    The decanter centrifuges you choose must be according to your design. Some applications require high speed while others require a big bowl for separation. Remember to always have a clear picture in your mind beforehand before buying the machine.
•    The same model of the machine can also have minor difference is feeding technique, fluid level and layout of the machine. Any change in them can drastically affect the performance of the machine.
•    Last but not least, the machine should be operated by a professional operator. Decanter centrifuge requires highly skilled operators for its functions. A lot of things depend on the capabilities of the operator. The major problem most jobsites suffer from is the lack of skilled operators. So, this aspect of the machine is no less important than the others.

Drilling Waste Management Core Equipment : Cutting Dryer

Drilling Waste Management System

Drilling waste management system equipment is consist of vertical cutting dryer , D Series Decanter Centrifuge , Screw Pump ……Industrialists and operators are looking for ways to recover synthetic based and oil based fluids used for drilling to reuse them, safeguarding both economic and environmental objectives.

Cuttings dryer reduces the amount of drilling waste that is produced and that which has to be transported and helps in recovering the reusable fluids. This makes a significant impact on the expenditure spend and helps in saving a lot of money, not to mention the environmental benefits.

Drilling Waste Management System
Drilling Waste Management System

Cutting dryer also reduces the amount of drill cuttings and wastes.
A normal dryer intake the wet drilling wastes and delivers the same amount of cuttings minus the drilling fluids. The drilling fluids are collected using centrifugal force and such dryers are normally called centrifugal dryers. Conventional dryers involve a number of steps for recycling drill fluids.

The cuttings have to be collected and transported to special equipment. This requires a large amount of manpower. Also, the transportation of cuttings poses several practical problems, such as the degradation of cuttings before they reach a dryer. This leads to the cuttings breaking down and makes fluid recovery more or less impractical, owing to its poor efficiency. As a result, this can actually increase the amount of drilling waste , making the whole process of fluid recovery a waste of time.

But new methods have now been developed by various industries for fluid recovery. It makes use of high speed air and pressure to recover fluids. The air dries the cuttings and is collected by a particular system to retrieve the drilling fluids.

As the machine can now be operated at less power, they require only minimum maintenance and manpower. The operating cost of such machines is way below the cost of centrifugal dryers and is less susceptible to mechanical failure. They also provide a greater output, resulting in a better efficiency.

Drill Waste Management System by Kosun Manufacturer

Drill Waste Management System

Drilling waste management system of Kosun with high quality is well known all over the world.

Drilling waste management system is composed  of: Vertical cuttings dryer , D Series Decanter Centrifuge ,  Screw Pump……

The term drilling refers to the very process of extraction of essential substances like oil and gas from the ground. The process is a couple of centuries old and today, it is a trillion dollar industry. It is in fact, one of the most important aspects measuring a country’s development and global position.

drilling waste management system
drilling waste management system

But like any other process, drilling also has some side effects in the form of unwanted waste. This waste generated as a result of drilling process is termed drilling waste and is not something that can be neglected, given the very large quantities generated each year. To shed further light into the fact, let us consider an example.

A study conducted back in 1995 showed a total quantity of 150 million barrels or drilling waste generated in America alone. Today the case is more severe as the extraction of the substances has also increased exponentially with equally rising demand.

So if you do the math, the amount that is generated each year on a global scale can amount to gigantic figures. Thus the process of drilling waste management and handling is of great importance in the present scenario.

Drilling waste may be in solid or fluid forms. Both types of wastes are generated at the end of an extraction process. But in order to handle or manage these wastes more effectively, experts classified them into two further subdivisions. They are namely, acceptable and non acceptable. As the name suggest, the first one is less dangerous and would degrade causing little or no harm to the environment. But that is not the case for non acceptable wastes. These require more careful handling and if left unattended, they may cause catastrophic results in the future.

Various methods for managing and disposing drilling waste have been developed so far and most of the organizations undertaking these activities have also put them to good use.

Drilling Waste Treatment Approach by Kosun

Drilling Waste Treatment

Drilling waste treatment  approach by Kosun play a very important role in  reducing waste generated during drilling activities to acceptable levels of the environment.

Oil and gas extraction has been a trillion dollar industry and will be for years to come. Thus the process and consequences of the extraction of these precious gifts from the earth also needs to be considered with some level of seriousness.

Drilling waste management equipment including: Vertical Cuttings Dryer( Vertical Centrifuge), D Series Decanter Centrifuge , Screw Pump , Hi-G Dryer and so on.

drilling waste treatment
drilling waste treatment

Due to the heavy demand of these commodities on a global scale, the activities that led to its production increases significantly over the years. This in turn, led to the generation of large quantities of unwanted waste, referred to as drilling waste.

So some suitable method for its disposal was requisite to the keep the problem under control. As a result of this, scientists and experts developed some effective techniques for effective and economical disposal of drilling waste and let’s take a look at some of the popular ones.

Drilling waste produced as a result of extraction of oil and gas are mainly categorized based on two different criterions. The first one, based on the nature of particles in the waste is divided into fluid wastes and solid wastes. The second classification based on how harmful the waste is towards environment categorizes it into acceptable and non acceptable waste disposal. Non acceptable are considered more dangerous and volatile to the environment and needs to be disposed off with greater care.

Today, with much importance given to ideas of sustainability and conservation, many companies in the extraction have taken it into making the process more environmental friendly. This can be done only through an effective waste disposal system.

There are truck services and transportation services available today that moves this waste from the extraction area for proper disposal. Later it is disposed off or converted into a useful form, agricultural fertilizers for instance. Salt water spills, fresh water drilling mud, crude oil spills etc are the byproducts of inefficient waste disposal. In cases of oil spillage, specialized services are available as well.

Drilling Waste Management Services by Kosun Help Companies

Drilling waste management services

Drilling waste management services are processing the wastes through vast and systematic equipments. Services from Kosun in recent was reflected helped many clients a lot.

The procedure is simple: First use shale shaker extracts drilling cuttings from the mines and then the extraction of fluids from the cuttings, the left is considered as drilling wastes which need to be managed.

After all the processing, the most important issue needs to be handled regarding drilling waste management services. The issue is determining the waste disposal option. It is the end stage of the total drilling waste management. An environment friendly waste disposal method must be followed in order to calm down all the controversy and criticism regarding environmental sustainability.

And following is the 3D picture of drilling waste management services by Kosun:

drilling waste management services
drilling waste management services

Here a brief discussion about the Drilling Waste Management Services Help Companies is given below:
How the drilling waste should be disposed? A very common disposal method of drilling waste is land spray while drilling. In this method, the drilling waste is sprayed by using a pump. This method of disposal is very effective for fluid based drilling waste.  It is very cost effective.

Another effective way of disposing drilling waste is pumping off the waste. In this process, the non – radioactive clear fluid of waste is pumped in a green planting area. It is very sustainable way of disposal as it ensures the best use of natural elements. Another vastly used approach for waste disposition is the mix – bury approach. In this method, a mixture is created by using drilling waste with mud of disposing area. Above the mixture of those two components, a single layer of soil is used to cover the mixture.

It is also a very environment friendly way of waste disposition as it causes minimum contamination. Finally, another way of disposing the drilling waste is using separate waste disposal sumps. In this method, several waste sumps are built for disposing different types of waste. It is the formal waste disposal system of drilling companies.

Drilling Waste Management Of Oil and Gas Handbook

Drilling Waste Management

Drilling waste management is one of the most frequent duties that should be performed in any drilling area. A skilled management system must be developed for the drilling waste management.

If any drilling company fails to perform certain sustainable procedure while drilling waste, it is certain to face the eye of the storm for the lack of competency in managing drilling waste.  So, in order to solve this problem, a very approach has been taken by the drillers all around the world.

drilling waste management system
drilling waste management system

They have developed a certain agenda of fundamental procedure for drilling and disposing the drilling waste in an environment friendly way. This is called the oil and gas handbook for drilling waste management. Now, here is a brief discussion about the handbook of drilling waste management is given below.

The handbook of drilling waste management: According to the handbook in order to manage shale shaker generated oil and gas drilling waste, the construction and functioning of any commercial offshore waste management site, an application should be placed in front of the Environmental Bureau and to the oil conservation division.

A drilling company must confirm a financial assurance before establishing any waste management and disposal site in the area. Surface waste management facilities must only handle the non – intoxicating waste so that it can’t cause any environmental degradation.

There should be different approaches for managing different kinds of waste depending on their contaminating and radio activity level. The professionals that are responsible for managing the drilling waste must be certified and well trained. Drilling sites must not expose any intoxicating waste to the environment in any circumstance. After gathering waste from shale shaker, shaker screen there should be a proper and an extensive procedure to decontaminate the drilling waste right before the disposal.

Finally, the handbook for waste management provides the necessary and valuable guideline to the drillers for a sustainable waste management.