Features of Drilling Waste Management System

KOSUN is the professional Drilling Waste Management Manufacturer and exporter. KOSUN can design and produce the Drilling Waste Management system and Drilling Waste Management equipment as requirment of customers.

drilling waste management
drilling waste management

In order to protect the environment in which we live, recycle drilling fluid and save more cost for customers, KOSUN sets up “Xi’an Oil & Gas Drilling Waste Management Engineering Center” and develops vertical cuttings dryer, Hi-G dryer, centrifuge, screw conveyor, screw pump and other first-class high-performance drilling waste management system, taking “zero discharge of drilling waste” as the drilling waste management standard.

Drilling waste management has put forward higher requirements with the constant improvement of the environmental protection requirement. It can not only be very good to solve the environmental problems, but also can do recycling to the waste of the solids control system. While drilling cutting management system maximize retains the useful mud, and it concentrated solidify after processing of drilling cuttings. That helps to reduce the destruction of the environment in oil filed worker.

drilling waste management manufacturer
drilling waste management manufacturer

In the process of oil and gas drilling, general shallow wells would use water-based mud, and deep wells would use oil-based mud, that makes conventional solids control equipment work effectively on recovery of heavy metal and stone and useful drilling fluid. However, these cutting fluids containing heavy metals and solids (presumably oil content at 12%~18%) would caused great damage on nearby vegetation, soil, groundwater and other natural environment building and human living environment if they are not managed to emissions.

Features of Drilling Waste Management System:

  1. Good Result of Water-based Mud: 6%-10% Water Content.
  2. Overwhelmingly overcomes the difficulty in disposing the waste all or disposing them effectively, which combines the technology brought from Italy with advantages of the same products abroad.
  3. Stable Performance:KOSUN Drilling Waste Management is to control the volume of water containing in the drilling mud and stabilize the liquid performance, which achieves the purpose of managing the drilling waste and recycle the drilling mud without damaging the water performance.
  4. Environmental and Economical: This cutting dryer system realizes the social value of environmental protection, maximizing the usage of drilling fluid economically. (Editor:Kosun Lily.Wang)

Kosun- China Solids Control Leader&Drilling Waste Mangemnet Expert

Tel.: +86 29 87304914/86-13891934239

Email:lily.wang@adkosun.com

Contact person: Lily Wang

Company Video:https://www.youtube.com/c/KosunSolidControl

Online consulting:

http://www.kosun.com

http://www.kosunscreen.com

http://kosunshaker.com

http://hankoresources.com

Drilling Waste Management Equipment and System

Recently,international community is paying more and more attention to environmental protection and customers have seen practical economic benefits brought by drilling waste management equipment. Drilling fluid recycled each day can save tens of thousands of US dollars for customers. More and more new and regular customers write to KOSUN to ask about our technologies and equipment related to drilling waste management.

drilling waste management equipment
drilling waste management equipment

What is drilling waste?Drilling waste means cuttings, waste mud and waste water mixture generated during the drilling process. These wastes can cause serious environmental pollution, and if being directly discharged, they will do great harm to soil and water resource, making covered earth surface barren.

Drilling Waste Management System and Equipment-KOSUN

In order to protect the environment in which we live, recycle drilling fluid and save more cost for customers, KOSUN sets up “Xi’an Oil & Gas Drilling Waste Management Engineering Center” and develops vertical cuttings dryer, Hi-G dryer, centrifuge, screw conveyor, screw pump and other first-class high-performance drilling waste management equipment, taking “zero discharge of drilling waste” as the drilling waste management standard.

drilling waste management system
drilling waste management system

Nowadays, KOSUN has completed the production and packaging of a batch of shaker screens for vertical cuttings dryers and is ready to ship them to Africa. These screens will serve as replacements of Vertical Cuttings Dryer screens active in Africa for drilling waste management. This set of KOSUN drilling waste management system has been used by turns at several African drilling sites after being sold to Africa in March 2014. Customers highly praised treatment result of the equipment.

KOSUN can not supply drilling waste management equipment,but can also provide solids control equipment,such as shale shaker,desander,desilter,drilling decanter centrifuge,desilter cone,mud agitator,etc(Editor:Kosun Lily.Wang)

Kosun- Solids Control Company/ Drilling Waste Management Company
Tel.: +86 29 87304914/86-13891934239
Email:lily.wang@adkosun.com
Contact person: Lily Wang
Company Video:https://www.youtube.com/c/KosunSolidControl
Online consulting:
http://www.kosun.com
http://www.kosunscreen.com
http://kosunshaker.com
http://hankoresources.com

Drilling Waste Management System From Famous Brand Kosun

Drilling Waste Management System

Drilling Waste Management System is very popular in the drilling industry.  There are three series:
1.oil & gas drilling solids control equipment
2.drilling waste treatment equipment
3. decanter centrifuges

drilling waste management system
drilling waste management system

Including 25 categories of products which can be provided by Kosun.
They are used in below category:
1.coalbed methane drilling
2.shale gas drilling
3.water well
4.geothermal well drilling
5.trenchless horizontal directional crossing projects,
6.mine gravel staged treatment
7.tailings treatment
8.rive dredging works
9.industrial wastewater treatment
10.environmentally friendly sewage treatment
11.waste oil recovery and purification treatment
12.oil &gas drillingand workover.etc.

drilling waste management system
drilling waste management system

In order to meet  for the requirements of international market, KOSUN have got approval of ISO9001, API SPEC Q1, ISO/TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certificates.

Advantages and Benefits

1.Recovery and Recycling
Reducing, recycling and recovery are key to effective waste management
deal with. We try to recycle and recover, reduce operating costs
As well as the affect on the environment.

2.Processing and Disposal
We provide several processing and handling options to solve your drilling waste need.
They were selected as part of our engineering fluid management
SM process to determine the appropriate action required – given specific fluid types, environmental restrictions and created waste streams

3.Inclusive and Handling
With the increasing pay more attention on environmental protection, the industry is dedicated to safe control and handling of drilling waste.
We share this commitment with the equipment portfolio to mitigate issues related to managing drilling waste,
Reduce environmental compliance issues and promote best practices.

Drilling waste management system not only shorten the drilling time but alos minimize borehole problems and take systematic measures.
Method to carry out the life cycle analysis of the well, can improve and maximize the drilling performance.

Kosun website welcome your coming. We will try our best to provide best service and high quality products. Please don’t hesitate to contact us.  We are happy to assist you.

 

Drilling Waste Management System High Quality Low Price From KOSUN

Drilling Waste Management System

Drilling waste  management system is consist of  several sets of equipment for conveying cuttings.

Oil and gas field enterprise solid waste mainly has three kinds: drilling waste mud, cuttings dryer, landing crude oil, sludge and oil sands.

drilling waste management system
drilling waste management system


1, Drilling Waste Mud

(1) Classification: water-based drilling mud, oil-based drilling mud and gas-based drilling mud.

(2) the source:

First, due to changes in geological properties, the mud system to replace the sludge generated, that is not suitable for drilling engineering and geological requirements of drilling mud, drilling process, due to failure of part of the performance was discharged drilling mud ;

Second, after completion of drilling wells in the mud field. That is, the mud in the wellbore which is replaced by the clean water when the well is completed;

Thirdly, the mud which is generated by the leakage of the mud circulation system, that is, the drilling mud discharged by the circulatory system running, dripping, The waste mud yield is 634T / 104m, the discharge volume of drilling mud is about 40 × 104T / year, and the emission rate is about 40%

(4) The main pollutants: hydrocarbons, salts, all kinds of organic polymers, lignin sulfonate, some heavy metals (such as mercury, chromium, copper, lead, arsenic) and barite impurities.

(5) nature: PH value is high, about 8.5 ~ 12, basic; contains a certain amount of weighting agent and chemical treatment agent; some drilling mud contains oil; some contain toxicity (due to drilling formation contains Toxic substances, additives contain toxic substances).

(6) Hazard: high pH, ​​high concentrations of soluble salts and petroleum affect the structure of soil and plant growth hazards; harmful heavy metal ions such as hexavalent chromium, divalent mercury, divalent cadmium, divalent lead and Organic compounds that can not easily be degraded by animals and plants, molecular polymers easily enter the food chain and accumulate in the environment or animals and plants, endangering the health and safety of human beings; organic waste treatment to increase the COD and BOD of aquatic organisms; Normal growth.

Drilling Waste Management System from Kosun Equipment

Drilling Waste Management System

Drilling waste management system demand  from below 5 points:
1.optimized solid control,
2.containment and disposal,
3.recycling
4.Recovery

5.treatment and disposal.

But this is not what we offer. 

We provide a complete range of services : maximum range and minimum risk so to meet all your drilling waste management. We offer a premium product warranty maximum reliability with minimum environmental risk.

drilling waste management system
drilling waste management system


To the people: we also offer maximum support from experienced, knowledgeable People – before and after you purchase – anywhere in the world. And by coupling. With a variety of high quality equipment and waste management expertise, we help ensure that maximum compliance with applicable regulations with minimum liability.

From service, you can not only get the comprehensive performance plan for each item, bu t alsp you get one thorough review, completion of a baseline comparative summary, review of established objectives,lessons learned and recommendations for improving future project procedures.

Reflecting the solid control – recovery and reuse, containment and handling of the specific needs of the kit,
Treatment and disposal. Shorten drilling time, minimize borehole problems and take systematic measures.
Method for well life cycle analysis can improve and maximize drilling performance.

We are able to provide our customers with three series of oil and gas drilling solid control equipment, centrifuges and drilling waste treatment equipment, including 25 products, which are widely used in oil and gas drilling and well repairing, CBM drilling, shale gas drilling, Drilling, vertical dryer ,trenchless horizontal directional crossover engineering, ore gravel stage treatment, tailings treatment, river dredging engineering, industrial wastewater treatment, environmental protection sewage treatment, waste oil recovery and purification treatment.
As for the requirements of the international market, Kosun has passed ISO9001, API SPEC Q1, ISO / TS 29001, ISO14001, OHSAS18001, CE, EAC and BV certification.

We are looking forward to your contaction. Welcome !

Drilling Waste Management Core Equipment : Cutting Dryer

Drilling Waste Management System

Drilling waste management system equipment is consist of vertical cutting dryer , D Series Decanter Centrifuge , Screw Pump ……Industrialists and operators are looking for ways to recover synthetic based and oil based fluids used for drilling to reuse them, safeguarding both economic and environmental objectives.

Cuttings dryer reduces the amount of drilling waste that is produced and that which has to be transported and helps in recovering the reusable fluids. This makes a significant impact on the expenditure spend and helps in saving a lot of money, not to mention the environmental benefits.

Drilling Waste Management System
Drilling Waste Management System

Cutting dryer also reduces the amount of drill cuttings and wastes.
A normal dryer intake the wet drilling wastes and delivers the same amount of cuttings minus the drilling fluids. The drilling fluids are collected using centrifugal force and such dryers are normally called centrifugal dryers. Conventional dryers involve a number of steps for recycling drill fluids.

The cuttings have to be collected and transported to special equipment. This requires a large amount of manpower. Also, the transportation of cuttings poses several practical problems, such as the degradation of cuttings before they reach a dryer. This leads to the cuttings breaking down and makes fluid recovery more or less impractical, owing to its poor efficiency. As a result, this can actually increase the amount of drilling waste , making the whole process of fluid recovery a waste of time.

But new methods have now been developed by various industries for fluid recovery. It makes use of high speed air and pressure to recover fluids. The air dries the cuttings and is collected by a particular system to retrieve the drilling fluids.

As the machine can now be operated at less power, they require only minimum maintenance and manpower. The operating cost of such machines is way below the cost of centrifugal dryers and is less susceptible to mechanical failure. They also provide a greater output, resulting in a better efficiency.

Drill Waste Management System by Kosun Manufacturer

Drill Waste Management System

Drilling waste management system of Kosun with high quality is well known all over the world.

Drilling waste management system is composed  of: Vertical cuttings dryer , D Series Decanter Centrifuge ,  Screw Pump……

The term drilling refers to the very process of extraction of essential substances like oil and gas from the ground. The process is a couple of centuries old and today, it is a trillion dollar industry. It is in fact, one of the most important aspects measuring a country’s development and global position.

drilling waste management system
drilling waste management system

But like any other process, drilling also has some side effects in the form of unwanted waste. This waste generated as a result of drilling process is termed drilling waste and is not something that can be neglected, given the very large quantities generated each year. To shed further light into the fact, let us consider an example.

A study conducted back in 1995 showed a total quantity of 150 million barrels or drilling waste generated in America alone. Today the case is more severe as the extraction of the substances has also increased exponentially with equally rising demand.

So if you do the math, the amount that is generated each year on a global scale can amount to gigantic figures. Thus the process of drilling waste management and handling is of great importance in the present scenario.

Drilling waste may be in solid or fluid forms. Both types of wastes are generated at the end of an extraction process. But in order to handle or manage these wastes more effectively, experts classified them into two further subdivisions. They are namely, acceptable and non acceptable. As the name suggest, the first one is less dangerous and would degrade causing little or no harm to the environment. But that is not the case for non acceptable wastes. These require more careful handling and if left unattended, they may cause catastrophic results in the future.

Various methods for managing and disposing drilling waste have been developed so far and most of the organizations undertaking these activities have also put them to good use.